Panasonic PT-L735NTE Contrast, Bright, Color, Tint, Sharpness, White Balance R/G/B, Tv-System

Page 20

CONTRAST

This adjusts the contrast of the picture. Press the H button to make the picture brighter, and press the

Ibutton to make the picture darker. (Adjust the BRIGHT setting first if required before adjusting the CONTRAST setting.)

BRIGHT

This adjusts the darker areas (black areas) in the picture. Press the H button if dark areas are too solid (for example, if hair is difficult to see), and press the I button if black areas are too light (grey rather than black).

COLOR

(S-VIDEO/VIDEO/YPBPRonly) Press the H button to make the colour more vivid in tone, and press the I button to make the colour more pastel in tone.

TINT

(NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture. Press the H button to make flesh tones more greenish, and press the I button to make the flesh tones more reddish.

SHARPNESS

Press the H button to make the picture details sharper, and press the I button to make the picture details softer.

Colour Hue Setting (COLOR TEMP.)

STANDARD

HIGH

LOW

This is used to adjust the white areas of the picture if they appear bluish or reddish.

Noise Reduction (NR)

(When S-VIDEO/VIDEO/YPBPRsignals are being input)

If the signal is of such poor quality that picture interference appears, you can suppress this interference by adjusting the NR (Noise Reduction). To strengthen the effect, press the H button. To turn it off , set to “0” by pressing the I button.

WHITE BALANCE R/G/B

(RGB only)

This is used to adjust the white areas of the picture if they appear colourised. Press the I button to make the selected colour lighter. Press the H button to make the selected colour stronger.

TV-SYSTEM

(S-VIDEO/VIDEO only)

AUTO1

AUTO2

NTSC

NTSC4.43

PAL

PAL-M

PAL-N

SECAM

AUTO1

The projector automatically distinguishes between NTSC/NTSC 4.43/PAL/PAL60/SECAM signals.

AUTO2

The projector automatically distinguishes between NTSC/PAL- M/PAL-N signals.

NOTE:

BThis should normally be set to “AUTO1” or “AUTO2”. If the signal is of such poor quality that the correct format cannot be automatically distinguished, change the setting manually to the required TV system.

Projecting sRGB- compatible pictures

sRGB is an international colour reproduction standard (IEC61966-2-

1)established by the International Electrotechnical Commission (IEC). If you would like the colours in sRGB-compatible pictures to be reproduced more faithfully, make the following settings.

#Press the F or G button to select “PICTURE MODE”, and then use the I or H button to select “NATURAL”.

$Press the F or G button to select “COLOR TEMP.”, and then use the I or H button to select “STANDARD”.

%Press the STD (standard) button on the remote control unit.

&Select the LAMP POWER item in the OPTION menu by pressing the F or G buttons and set to “HIGH” by pressing the I or H buttons.

NOTE:

BsRGB is only enabled when RGB signals are being input .

Adjustments and settings

38-ENGLISH

ENGLISH-39

Page 19 Page 21
Image 20
Page 19 Page 21
Contents LCD Projector Commercial Use Model No. PT-L735NTEDear Panasonic Customer PreparationModel number PT-L735NTE / PT-L735E Important the Moulded Plug U.K. onlyContents Precautions with regard to safetyDo not handle the mains lead plug with wet hands Insert the mains lead plug securely into the mains socketDo not place the projector into water or let it become wet Do not place liquid containers on top of the projectorAccessories Do not put your weight on this projectorPT-L735NTE only Use only the specified batteriesAbout the wireless card and SD memory card PT-L735NTE only Before useDo not touch the surfaces of the lens with your bare hands About the screenLocation and function of each part Remote control unit Projector control panelPT-L735NTE only Wireless card SD memory card Setting-up Projection methodsProjector position Projection distancesExample of connecting to computer Example of connecting to video equipmentsConnections Monitor Computer for Control useTurning on the power # Presspower.the Main Power switch to turn on$Press the Power button Turn on the power of all connected devicesTurning off the power RGB Input indicator Press the Auto Setup buttonPOSITION, DOT CLOCK, Clock Phase Projector statusEnlarging the picture D.ZOOM Pausing a picture FreezeTurning off the picture and sound momentarily Shutter Wireless mouse Mode switch Computer/ProjectorLaser beam pointer ButtonsOn-screen menus Menu screensMenu operation guide Picture Mode Adjusting the pictureReturning a setting to the factory default Contrast BrightColor TintAdjusting the position Clock PhaseDOT Clock PositionAuto Setup OSD PositionAspect ResizingChanging the display language Audio adjustmentOption settings Lamp Power Auto Power OFFRGB/YPBPR BlackboardSetting up the Security function Text Display Change TextLogo Display Logo ClearLamp indicator Temp indicator Lamp indicatorLamp Power RemedyLamp unit replacement period Lamp unit replacement procedure Turn off the power+ Select the Lamp RUN Time by pressing the F or G buttons Press and hold the Enter button for approximately 3 secondsBefore calling for service Cleaning and maintenanceBefore carrying out cleaning and maintenance, be Sure to disconnect the mains lead plug from Mains socketOptions SpecificationsRemote control unit Appendix List of compatible signals Connector pin wiringProjection dimensions calculation methods Using the Serial connector Dimensions Trademark acknowledgements
Top Page Image Contents