Audio adjustment
Select the items by pressing the F or G buttons on the remote control unit or the projector.
AUDIO
VOLUME | 20 |
|
MUTE | OFF | ON |
AUDIO MODE | VOICE | NORMAL |
VOLUME
Press the I or H buttons to adjust the volume of the sound output by the projector’s
MUTE
Set the MUTE to “ON” pressing the
Ior H buttons to turn off the volume of the sound output. To release muting, set to “OFF” pressing the I or H buttons.
Option settings
Use the F and G buttons on the projector or remote control unit to select an item, then press the I or
Hbuttons to change the setting.
OPTION
OSD | OFF | ON |
AUTO SEARCH | OFF | ON |
AUTO SIGNAL | OFF | ON |
AUTO KEYSTONE | OFF | ON |
RGB2 SELECT | INPUT | OUTPUT |
RGB/YPBPR | RGB | YPBPR |
VGA60/525P | VGA60 | 525P |
BLACKBORD | OFF | ON |
BACK COLOR | BLUE | BLACK |
OFF
AUTO SEARCH is disabled.
NOTE:
BAUTO SEARCH will not function |
when the input signal is being |
projected. |
AUTO SEARCH will not function |
when NETWORK or SD CARD is |
selected. NETWORK and |
SELECT:[^][@] ENTER:[ENTER]
ADJUST:[{][}] ESC:[MENU]
AUDIO MODE
Set to “VOICE” by using the I and
Hbuttons when the sound output is mainly conversations. The sound will become easier to hear.
NEXT PAGE @ |
|
SELECT:[^][@] |
|
ADJUST:[{][}] | ESC:[MENU] |
OPTION
PREVIOUS PAGE ^ |
SD CARD cannot be searched even |
when these signals are being input. |
AUTO SIGNAL
This should normally be set to “ON”.
ON
Changing the display language
Use the F, G, I and H buttons on the projector or remote control unit to select a language, then press the ENTER button to accept the setting.
LANGUAGE
ENGLISH ESPAÑOL
DEUTSCH ITALIANO
FRANÇAIS
SELECT:[^][@][{][}] ESC:[MENU]
SELECT:[{][}] ENTER:[ENTER]
FRONT/REAR | FRONT | REAR |
DESK/CEILING | DESK | CEILING |
FAN CONTROL | STANDARD | HIGH |
LAMP POWER | LOW | HIGH |
LAMP RUN TIME |
| 10 H |
FUNC1 | MUTE | KEYSTONE |
CONTROL KEY | OFF | ON |
AUTO POWER OFF | DISABLE | |
SELECT:[^][@] | ENTER:[ENTER] | |
ADJUST:[{][}] | ESC:[MENU] | |
OSD
ON
The current input name is displayed in the
OFF
Use this setting when you do not want the current input name to be displayed.
AUTO SEARCH
ON
The input signal will be detected and selected automatically when the Input select (RGB, VIDEO) buttons are pressed for a few seconds. (page 14)
AUTO SETUP will be carried out automatically when the input signal is changed. (page 27)
OFF
AUTO SETUP will not function when the input signal is changed.
AUTO KEYSTONE
This should normally be set to “ON”.
ON
During automatic setup, the angle of tilt of the projector is detected and keystone distortion is corrected automatically.
OFF
Use this setting when you do not want automatic keystone correction to be carried out during automatic setup, such as when the screen itself is at an angle.
RGB2 SELECT
This setting is used to select the function of the RGB2 IN/RGB1 OUT connector.
Adjustments and settings