Error Message List
No beep Error Messages | FRU/Action in Sequence |
|
|
No beep, | Power source (battery pack and power adapter). See “Power |
blank. | System Check” on page 73. |
| Ensure every connector is connected tightly and correctly. |
| Reconnect the DIMM. |
| LED board. |
| System board. |
|
|
No beep, | Power source (battery pack and power adapter). See “Power |
blank. | System Check” on page 73. |
| Reconnect the LCD connector |
| Hard disk drive |
| LCD inverter ID |
| LCD cable |
| LCD Inverter |
| LCD |
| System board |
|
|
No beep, | Reconnect the LCD connectors. |
blank. But you can see POST on an external | LCD inverter ID |
CRT. | LCD cable |
| |
| LCD inverter |
| LCD |
| System board |
|
|
No beep, | Ensure every connector is connected tightly and correctly. |
blinking cursor shown on LCD during POST. | System board |
|
|
No beep during POST but system runs correctly. | Speaker |
| System board |
|
|
Error Beep List
Code | Beeps | Description |
|
|
|
00h | Two long beeps, one short beep, and then one long beep | Success |
|
|
|
F1h | One long, One short beeps | BIOS file size mismatch |
|
|
|
F2h | One long, two short beeps | BIOS file reading error |
|
|
|
D1h | Two short beeps | Floppy drive not installed |
|
|
|
Chapter 4 | 79 |