CONTROLS
Keypad Functions
On Switch: momentary action turns on unit
Power Light: Indicates unit is turned on Flashing light indicates low battery
Feed Switch: Advances media when held down.
IR Window; must be aligned with corresponding window on host for IR communications to occur. (Units with IR option only)
Status Light: Steady light indicates printer is either out of media, or media cover is open. Flashing during data transmission between host and printer indicates normal wireless operation.
Self Test
Cameo PEP can perform a self test which will print a line of interlocking “x” characters to insure all ele- ments of the print head are working, and then print out the version of software loaded in the printer. Refer to the Troubleshooting section for details on interpreting the
The self test is activated by the following key sequence:
1.Press the "FEED" key
2.While still holding down the "FEED" key, turn on the printer by pressing and releasing the "ON" key.
3.Keep the "FEED" key depressed until self test starts.
The printer will perform the self test and remain on.
6 |