Zebra Technologies P4T manual NCC Taiwan Compliance Statement, Europe EU Declaration of Conformity

Page 32

P4T/RP4T User Guide

Manual Introduction

RP4T Printers 35

pg.

pg.

4

 

P4T Overview- pg. 5

Maintenance pg. 36

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of compliance with the R&TTE Directive 1999/5/EC:

• EN55022

European Emissions Standard

• EN 60950-1

Safety of Information Technology Equipment

• EN 300 328-2 V1.2.1

Technical requirements for spread-spectrum radio equipment

• EN 301 489-17 V1.2.1

EMC requirements for spread-spectrum radio equipment.

This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and office use in all EU and EFTA member states, except in France where restrictive use applies.

The use of this frequency band in France is subject to restrictions. You may only use channels 10 and 11 (2457 and 2462 MHz) on French territory, except in those French departments as listed in the table below where channels 1-13 (2412-

2472 MHz) may be used. For more information see http://www.anfr.fr/ and/or http://www.art-telecom.fr

NCC (Taiwan) Compliance Statement

經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用 者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發 現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。低功率射頻 電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備 之干擾。

“ According to “Administrative Regulations on Low Power Radio Waves Radiated

Devices” Without permission granted by the NCC, any company, enterprise, or

user is not allowed to change frequency, enhance transmitting power or alter

original characteristic as well as performance to a approved low power radio-

frequency devices. The low power radio-frequency devices shall not influence

aircraft security and interfere legal communications; If found, the user shall

cease operating immediately until no interference is achieved. The said legal

communications means radio communications is operated in compliance with the

Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference

Printer Preparation pg. 7

38

Troubleshooting pg.

Connecting the Printer pg. 27

43

Specifications pg.

Radio Regulatory Information pg. 31

Appendices pg. 46

 

Index pg. 52

01

02

03

05

08

09

10

11

12

16

19

2A

2B

21

24

25

26

27

32

35

Ain

Aisne

Allier

Hautes Alpes

Ardennes

Ariege

Aube

Aude

Aveyron

Charente

Correze

Corse Sud

Haute Corse

Cote d’Or

Dordogne

Doubs

Drome

Eure

Gers

Ille et Vilaine

36

37

39

41

42

45

50

54

55

57

58

59

60

61

63

64

65

66

67

68

Indre

Indre et Loire

Jura Loir et Cher

Loire

Loiret

Manche

Meurthe et

Moselle

Meuse

Moselle

Nievre

Nord

Oise

Orne

Puy de Dome

Pyrenees

Atlantique

Hautes Pyrenees

Pyrenees

Orientales

Bas Rhin

Haute Rhin

69

70

71

72

75

77

78

79

82

84

86

88

89

90

91

92

93

94

Rhone

Haute Saone

Saone et Loire

Sarthe

Paris

Seine et Marne Yvelines

Deux Sievres

Tarn et Garonne

Vaucluse

Vienne

Vosges

Yonne

Territoire de Belfort

Essonne

Hauts de Seine

Seine St Denis

Val de Marne

from legal communications or ISM radio wave radiated devices.”

Section Continues

32

Image 32
Contents Manual Introduction RP4T Printers Printer Preparation pgIndex pg UMAN-P4T-010 Rev.AProprietary Statement Document Conventions Connecting the Printer pg Introduction to the P4T SeriesUnpacking and Inspection Reporting DamageUSB Port Printer Preparation pg Troubleshooting pgP4T/RP4T Overview Thermal Transfer P4T Series TechnologyDirect Thermal Printer Preparation Battery SafetyCharger Safety Single Battery Charger Specifications pgApproved Chargers Unauthorized equipmentBattery Charging Receptacle P4T Series Battery Pack LI72 Battery ChargerConnecting Printer Specifications IndexMaintenance pg P4T Series BatteryLED Status Charger Status Input VoltageAC Power Cord varies with Location P4T Series AC Adapter Printer Charging Printer LCD Power Button Operation StatusDC Power Cord open wires P4T Series DC AdapterVehicle cradle as Indicated Access the charger receptacle located on the bottomP4T Vehicle Cradle DC Adapter Installation Guidelines DC Adapter Indicators under each battery will allow Front panel is onYou to monitor the charging process per Table belowWith the P1026943-1 AC Adapter Installing the P4T Series Battery PackCharger port for use Load the Media Loading Media From An External Supply Media Spacer Rear Feed Slot External Media SourceGuide Adjusting The Media Support Disks Load the Ribbon Cartridge Tion for more information on the printer status icons Printer ControlsOperator Controls Programmable LCD Settings Function Default setting Scroll & Select OptionsWlan ID Adjustable Shoulder Strap Snap into feature on printerHold Buckle To lengthen Pull Strap hereVerify the Printer Is Working Before you connect the printer to your computer orPortable data terminal, make sure that the printer is Proper working order. You can do this by printing a conRegulatory pg Index pg Printer pg TroubleshootingRadio Information Appendices Battery Charging Connector Connector ConnectorConnector DetailsConnect the Printer by Radio Communications with your printerBluetooth Networking Overview Wireless CommunicationsSetting Up the Software European Regulatory Information for this Radio Bluetooth ZBR4 RadioRadio Regulatory Information NCC Taiwan Compliance Statement Europe EU Declaration of Conformity802.11b/g and Bluetooth Co-located Radio Modules Configuration Rfid optionPrinter Model DigitModel RP4T Rfid Encoder Generation 2 Class 1 UHF Passive Tags Supported By The P4TGeneral Cleaning Instructions Preventive MaintenanceExtending Battery Life P4T Series Cleaning Area Cleaning Method IntervalMechanism Tear EdgeIcon Status Indication Ref. to Troubleshooting Topic TroubleshootingTroubleshooting Topics Troubleshooting Topics Poor or faded print or low battery icon flashingTo terminate the Communications Diagnostics Mode Troubleshooting TechniquesTo enter Communications Diagnostics Mode Second diagnostic report for a printer with an First diagnostic report for all P4T Series printersBluetooth radio Second diagnostic report End of second diagnostic reportSpecifications Printing SpecificationsConnecting Printer pg P4T/RP4T UserRadio Information Rotation Angles Fonts AvailablePhysical/Environmental/Electrical Specifications 220,5 mm 57 in ,5mm80,2 mm External Media Supply Loading SlotAppendix a Interface CablesContact the Factory or your Zebra Sales Representative For more information on interface cables to most majorMedia Supplies Maintenance SuppliesAppendix B Appendix C Appendix D Product SupportAmericas, contact Asia Pacific region, contactAppendix E Appendix F Select manual type Click on SubmitAppendix G- Patents Index Zebra Technologies Corporation UMAN-P4T-010 Rev. a October
Related manuals
Manual 13 pages 12.38 Kb

P4T specifications

Zebra Technologies is a leading provider of printing solutions, specializing in the design and manufacture of a wide range of printers and mobile devices. Among their impressive lineup are the QL420, RP4T, P4T, and QLn420 printers, each engineered to meet specific printing needs across various industries. These devices combine advanced technology with user-friendly features, making them essential tools for businesses looking to improve efficiency and productivity.

The QL420 is a versatile, portable printer that excels in printing labels and receipts on-the-go. It features direct thermal printing technology, allowing for high-quality output without the need for ink or toner. This printer stands out with its robust construction, designed to withstand everyday use in challenging environments. The QL420 supports a variety of media sizes, making it ideal for applications in retail, logistics, and healthcare.

The RP4T is another outstanding model within Zebra's mobile printing range. This printer offers RFID capabilities, allowing users to print and encode RFID labels seamlessly. It is engineered for easy integration into existing workflows, with a simple interface and multiple connectivity options, including Bluetooth and Wi-Fi. The RP4T's lightweight design and long-lasting battery enhance portability, making it perfect for field operations where mobility is essential.

The P4T printer also focuses on providing RFID printing solutions but enhances this experience by offering rugged durability. It features a robust design that meets military standards for durability and environmental resistance. The P4T is capable of printing on a wide range of materials, making it suitable for harsh conditions, including outdoor and industrial applications. Its versatile connectivity options ensure compatibility with various devices and networks.

Lastly, the QLn420 represents the pinnacle of Zebra's mobile printing technology. This model is designed with user comfort in mind, offering an ergonomic design that minimizes user fatigue during extended use. The QLn420 provides high-resolution printing, ensuring clear and detailed labels and receipts. With advanced management features and a user-friendly interface, it provides users with everything they need to streamline operations efficiently.

In summary, Zebra Technologies offers a diverse range of portable printers – the QL420, RP4T, P4T, and QLn420 – each equipped with unique features and capabilities that cater to different printing needs. With their emphasis on durability, connectivity, and user-friendliness, these printers are invaluable assets for businesses across various sectors, enhancing operational efficiency and productivity.