Zebra Technologies P330m, P330i user manual Feeding One Card at a Time

Page 39

Printing a Card

Feeding One Card at a Time

8.Once you are ready to print, go to the File menu and select Print.

9.If the printer was not selected as the default printer, go to the File menu, select Print Setup and choose Zebra P330i Card Printer (or Zebra P330m Card Printer) from the printer names list. Then Close the Print Setup dialog box.

10.The printer will feed in a card and start printing (the data download time will vary depending on the complexity of the card design and the processing speed of your computer).

11.Once the printing job is complete, the card is ejected from the printer.

Feeding One Card at a Time

A Manual Feed Slot is available below the Card Input Hopper for feeding single cards. The Card Input Hopper must be empty for single-card feeding to work properly.

1.Open the Card Feeder cover. Verify that there are no cards in the feeder, then close the Card Feeder cover.

2.Insert a single card into the slot below the Card Feeder. Do not feed more than one card at a time.

Note • If single-card feeding will be the normal mode of operation, you may select that mode through the driver software. In single-card feed mode, the card will not be printed until the print job has been sent to the printer and the card to be printed has been inserted into the single-card feed slot

980459-001 Rev C

P330i & P330m Card Printer User’s Manual

27

Image 39

Contents Zebra P330i & P330m Card Printer User’s Manual Page Foreword Return Materials AuthorizationCopyright Notice TrademarksProduct Disposal Declarations of Conformity Declarations of Conformity FCC RegulationsSmart Card Options Printer ModelsIcons Viii P330i & P330m Card Printer User’s Manual Rev C Contents Printing a Card Appendix B Smart Card Contact Station P330 i & P330 m Card Printer User’s Manual Rev C Introduction Controls, Connectors, and Indicators Print Head Open LCD PanelIntroduction General Information Installation and SetupUnpacking the Printer Installation and Setup CD-ROM with Driver Wizard Print Head Carriage Latch Installing the Print Driver Loading a Ribbon Take-up Spool Flange Supply Spool Installation and Setup Installing the Card Cleaning Cartridge Close the printer’s Main Cover Setting the Card Thickness Control Card Thickness Control Loading Cards Installation and Setup Card Output Hopper Connecting the Printer to your Computer Connecting Power Packing the Printer for Shipment Printing a Test CardPacking the Printer for Shipment Printing a Card Setting Printer PropertiesPrinting a Sample Card Feeding One Card at a Time Printing a Card Cleaning Cleaning the PrinterWhen to Clean How to Clean Cleaning the Print Head Card Cleaning Cartridge When to Replace the Cleaning RollerHow To Replace the Cleaning Roller Cleaning Replace the Card Cleaning Cartridge into the printer Troubleshooting Head Open message Print Quality Issues Troubleshooting Troubleshooting Troubleshooting Troubleshooting the Ethernet Connection and Adapter Resetting to Factory DefaultsEthernet Adapter Status Indicator Network Status/Activity Indicator Card Specifications Technical SpecificationsGeneral Specifications Ribbon SpecificationsCard Dimensions Bar CodesFonts Environmental Mechanical SpecificationsBi-Directional Communications Interfaces ElectricalOptions Magnetic Card Encoder IntroductionMedia Loading Orientation Sample Encoding Program Magnetic Encoder CleaningISO Standard Encoding Magnetic Card Encoder Smart Card Contact Station DB-9 Pin Smart Card Contact Points Smart Card Contact Station InterfacePrinter Sharing Connecting to a NetworkInternal Print Server External Print ServerEurope Worldwide Sales & SupportSales and Support Locations AmericasWebsite Latin America Sales OfficeAsia Pacific