LENS REPLACEMENT AND INSTALLATION PROCEDURE
NOTE: The installation procedure and needed parts for lens installation depend on the type of the Projection Lens. Check the Model No. of the Projection Lens and be sure to install or replace the lens following the procedure below.
1 | Remove the Lower Lens Cover. Remove the two |
|
(2) Screws A. Push the part B and pull the Lower | B | |
|
Lens Cover down. (See Fig. 1.)
A | LOWER LENS |
| COVER |
|
|
| C |
2Remove the four (4) Screws C. Pull the Upper Lens Cover toward the front and remove.
(See Fig. 2.)
UPPER LENS
COVER
Fig-1
C
Fig-2
E
UPPER LENS
COVER
3Remove the two (2) Screws D and the Cover Plate on the back of the Upper Lens Cover.
(See Fig. 3.)
COVER PLATE | D |
Fig-3
- 2 -
