Zebra Technologies P330i, P330m user manual Network Status/Activity Indicator

Page 54

Troubleshooting

Troubleshooting the Ethernet Connection and Adapter

5.If the LED is alternately flashing red and green for longer than 2 minutes, the Ethernet Adapter is in firmware-download mode. This means it is waiting for new firmware data to be sent before it continues normal functioning. Perform the following:

•If the Ethernet Adapter was purposely put into firmware-download mode, finish the download with the proper update utility. Contact the Zebra web site at http://www.zebra.com to download this utility.

•Contact Technical Support for help recovering this unit.

Network Status/Activity Indicator

A bi-color Status/Activity LED indicates network speed, established link, and network activity.

1.If the LED is off, no link was established.

2.If the LED is solid green, a 100Base link is established.

3.If the LED is flashing green, a 100Base link is established and network activity has been detected.

4.If the LED is solid orange, a 10Base link is established.

5.If the LED is flashing orange, a 10Base link was established and network activity has been detected.

Network activity detected by this LED does not mean the activity is data for the print server. The activity is all activity on the network seen on the Ethernet Adapter.

42

P330i & P330m Card Printer User’s Manual

980459-001 Rev C

Image 54

Contents Zebra P330i & P330m Card Printer User’s Manual Page Return Materials Authorization ForewordCopyright Notice TrademarksProduct Disposal Declarations of Conformity FCC Regulations Declarations of ConformityPrinter Models Smart Card OptionsIcons Viii P330i & P330m Card Printer User’s Manual Rev C Contents Printing a Card Appendix B Smart Card Contact Station P330 i & P330 m Card Printer User’s Manual Rev C Introduction Controls, Connectors, and Indicators LCD Panel Print Head OpenIntroduction Installation and Setup General InformationUnpacking the Printer Installation and Setup CD-ROM with Driver Wizard Print Head Carriage Latch Installing the Print Driver Loading a Ribbon Take-up Spool Flange Supply Spool Installation and Setup Installing the Card Cleaning Cartridge Close the printer’s Main Cover Setting the Card Thickness Control Card Thickness Control Loading Cards Installation and Setup Card Output Hopper Connecting the Printer to your Computer Connecting Power Printing a Test Card Packing the Printer for ShipmentPacking the Printer for Shipment Setting Printer Properties Printing a CardPrinting a Sample Card Feeding One Card at a Time Printing a Card Cleaning Cleaning the PrinterWhen to Clean How to Clean Cleaning the Print Head Card Cleaning Cartridge When to Replace the Cleaning RollerHow To Replace the Cleaning Roller Cleaning Replace the Card Cleaning Cartridge into the printer Troubleshooting Head Open message Print Quality Issues Troubleshooting Troubleshooting Troubleshooting Troubleshooting the Ethernet Connection and Adapter Resetting to Factory DefaultsEthernet Adapter Status Indicator Network Status/Activity Indicator Ribbon Specifications Technical SpecificationsGeneral Specifications Card SpecificationsCard Dimensions Bar CodesFonts Electrical Mechanical SpecificationsBi-Directional Communications Interfaces EnvironmentalOptions Magnetic Card Encoder IntroductionMedia Loading Orientation Magnetic Encoder Cleaning Sample Encoding ProgramISO Standard Encoding Magnetic Card Encoder Smart Card Contact Station Smart Card Contact Station Interface DB-9 Pin Smart Card Contact PointsConnecting to a Network Printer SharingExternal Print Server Internal Print ServerAmericas Worldwide Sales & SupportSales and Support Locations EuropeWebsite Latin America Sales OfficeAsia Pacific