
| |
|
|
Network Wide Backup & Restore |
|
Requirements | 4- |
This section references the various requirements, both hardware and software, necessary to support the Network Wide Backup & Restore Release 1.0 software.
Hardware Requirements
Since Network Wide Backup & Restore software has to be coresident with INM Release 5.0, the recommneded hardware platforms of choice are described in INM Release 5.0 Planning Guide under the section “INM Release 5.0 Requirements”.
Operating System Requirements
HP workstations must run
4
Again since Network Wide Backup & Restore software is coresident with INM Release 5.0, refer to INM 5.0 Planning Guide for detailed information on operating system requirements and
First Time Installation
If the workstation is purchased from Northern Telecom (Nortel), the
However, the following tasks must be performed before installing the software:
•Connect the workstation to the local area network (LAN).
•Configure
•Modify the
Network Wide Backup & Restore Planning Guide Rel 1.0 Standard July 1999