Nortel Networks NTNM13XKAB One Time Backup Tab, One Time Backup tab, Setting up a One Time Backup

1-14Network Wide Backup & Restore Description

“Save as Defaults” action button saves the current information in the data fields as the UI defaults for recurring backups. This is stored, and can be read in by the “Set To Defaults” action button. It is important to realize that this information should be generic enough to span the entire controller list, not just selected controllers.

One Time Backup Tab

Figure 1-8

One Time Backup tab

The one time backup tab allows for a backup to take place on a controller which occurs only once. A one time backup might be performed before some upgrades, testing etc.

Setting up a One Time Backup

To set up a one time backup time for a particular controller, select the controller and the One-Time Backup tab. Then set the required fields. The following table lays out the field type, description, and valid input.

Table 1-5

Setting up a One Time Backup information

Field	Description	Valid Input
Start Date
YYYY	Four digit calendar year.	XXXX where XXXX denotes an integer form of year.
MM	Two digit calendar month.	XX-- where XX denotes an integer between 01 - 12 inclusive.
		—continued—

Integrated Network Management Rel 1.0 Standard July 1999