Nortel Networks 400-S manual Ats0=1&w\r

72 Chapter 7 Out-of-band management support

Figure 14 HyperTerminal COM1 Properties dialog box

6From the Bits per second list, select 115200 to set the modem speed, and then click OK.

HyperTerminal establishes a connection to the modem and the cursor is positioned in the main HyperTerminal dialog box.

7Enter:

ats0=1&w\r

This command instructs the modem to answer on the first ring and saves the settings to the modem. Some modems respond with “OK” or a similar message when the settings are saved to the modem.

8Disconnect the modem from the PC.

209375-A