.
23
Chassis installation fundamentals
This chapter describes fundamental information that you need for installing the Ethernet Routing Switch 8300 chassis (8306 and 8310 chassis) .
Each Ethernet Routing Switch 8300 chassis consists of a sheet metal enclosure and a backplane. The number of bays for fan trays depends on the chassis type.
For information about the minimum software versions required to support the hardware, see Nortel Ethernet Routing Switch 8300 Administration,
This section includes information about the following chassis types:
•Ethernet Routing Switch 8310 chassis
•Ethernet Routing Switch 8306 chassis
Navigation
•“Ethernet Routing Switch 8310 chassis” (page 23)
•“Ethernet Routing Switch 8306 chassis” (page 25)
•“Power supplies” (page 26)
•“Fan trays” (page 27)
•“Site requirements” (page 27)
•“Hardware requirements” (page 28)
•“Successful installation verification” (page 32)
Ethernet Routing Switch 8310 chassis
The Ethernet Routing Switch 8310 chassis provides eight slots for installing Ethernet Routing Switch 8300 I/O modules and two slots for installing the Ethernet Routing Switch 8393SF/CPU or 8394SF/CPU
Nortel Ethernet Routing Switch 8300
Installation — Chassis
16 June 2008
Copyright © 2008 Nortel Networks