Nortel Networks 8310, 8306 manual AC input electrical requirements, Shipment contents

Hardware requirements

Environmental requirements

28Chassis installation fundamentals

Use the following guidelines to plan front and rear access:

•The maintenance aisle in front of the frame requires a clearance of 76.2 centimeters (cm) (30 inches).

•The wiring aisle at the back of the frame requires a clearance of 61 cm (24 inches).

AC input electrical requirements

Refer to the power specifications for the power supply in “Technical specifications” (page 55).

For AC input power specifications for each of the modules, see Nortel Ethernet Routing Switch 8300 Installation — Modules, (NN46205-305).

The installation site must meet the following environmental requirements for 8300 chassis operation. For more information, see the following table.

Table 2		￿￿￿￿
Environmental requirements
Altitude	Humidity	Temperature
0-10 000 feet (ft)	5%-85%, noncondensing	32 F-104 F (0 C-40 C),
(0-3 048 meters [m])		stable

This section includes information about the hardware shipped with the 8306 and 8310 chassis.

Shipment contents

In addition to the Ethernet Routing Switch 8310 or 8306 chassis, your shipping container contains several hardware accessories. Verify that the items in the shipping container match those on the shipment packing list.

The following table is a checklist of items included in the shipment container. For information about ordering replacement parts, see “Part Numbers” (page 51).

Nortel Ethernet Routing Switch 8300

Installation — Chassis

NN46200-309 01.01 Standard

16 June 2008

Copyright © 2008 Nortel Networks