CONTROLS AND FEATURES
Punch Housing
End Caps
Mounting Screws
This section describes the various controls and features of the Punch amplifiers.
Top View of Amplifier and End Caps
The cast aluminum heatsink of the Punch is designed for high performance cooling. The raised design of the hous- ing allows cables and wires to run underneath the unit. This provides for greater wiring flexibility and protects the cables from damage caused by excessive heat and bend- ing.
Interchangeable end caps conceal the wiring and input cables, giving the amplifier a clean, "stealth" look. Also incorporated, is a holding dimple built into the end cap. This small feature enables the cap to be held in place while being mounted.
The end caps are secured to the housing with flush mounting, captive screws.
Four (4) custom, round, hex screws included in the acces- sory pack hold the unit in place. These screws are covered when the end caps are installed.
6