Front View of Input/Output Terminals

Treble	Left Input	Right Input	Bass
Adjust	Gain Control	Gain Control	Adjust

Left Speaker	RCA Input	Right Speaker
Output	Connectors	Output

Speaker

Output

Terminals

Treble /

Bass

Input

Gain

Controls

Input Connectors

These gold plated terminal blocks connect the Right and Left channel outputs to the speakers and accept wire sizes from 8 gauge through 18 gauge. Gold plated con- nectors are immune to corrosion that can cause signal deterioration.

These controls adjust the amount of treble and bass response desired. To increase the amount of response, turn the dials clockwise; to decrease, turn the dials coun- terclockwise.

These controls are factory preset to 500 millivolts to match most head units and are variable from 250 millivolts to one volt. (More than likely they will not need adjusting.)

If just a little volume from the source unit drives the amplifier into distortion, reduce the input gain controls so that the distortion doesn’t start until the source volume is at about 3/4 of its rotation.

The amplifier’s signal input, female, RCA jacks should be connected to the source unit’s signal outputs with high- quality RCA cables. The connectors have been plated in gold to eliminate the possibility of corrosion that can cause signal deterioration.