ªHearing the Voice Recorded
(Voice Playback) (l 25)
≥The screen shows a simple black background.
≥Fast forward (or fast backward) will be reset to normal playback at the beginning of the next file.
ªListening to Music (Music
Playback) (l 26)
≥Only the
≥This SD Multi AV Device alone does not allow tracks to be recorded or deleted.
≥Refer to the PDF manual of the SD- Jukebox Ver.3.0 as for Recording Music file and Playlist.
≥If there is no Music file, [SELECT PLAYLIST] screen on the menu is not displayed.
≥If [POWER SAVE] has been set to [ON] on the menu, the LCD Monitor will be turned off approx. 5 seconds after playback and the SD Multi AV Device will be turned off approx. 30 seconds after stopping. Turn the power [OFF], then turn it on again. (You may press the [ ■ /1 ● ] button on the remote controller, to turn the power on.)
≥If the still picture associated by the SD- Jukebox Ver.3.0 is large (volume), it may take a longer time to be displayed than expected.
≥If there are two or more still pictures associated by the
≥Even if a still picture has been associated by the
≥A title, an artist name or the [PLAYLIST] may not be displayed in some cases.
≥All music files are locked.
≥Using its Formatting Function, all the data on an SD Memory Card can be erased.
≥MP3 is the abbreviation for MPEG1 Audio Layer3.
≥Normal MP3 files cannot be played back. Use the data created with
≥Some MP3 or
≥The bit rates (recommended) supported are 64 kbps, 96 kpbs or 128 kbps for both the
≥WMA data cannot be played back.
ªAdjusting the Volume (l 27)
≥The L/R indication on the earphones represents Left/Right.
≥When checking the sound which is being recorded, volume adjustment is not available.
ªBacklight Compensation
Function (l 28)
≥When the Backlight Compensation Function is activated, the entire screen becomes brighter.
≥Turning the power off will release this function.
≥It is not possible to use Horizontal Stripes Reduction Mode and to adjust White
Balance when this mode is activated. ≥The backlight may not be sufficiently
compensated for in dark places. ≥The Backlight Compensation Function
cannot be set or released while recording.
ªAdjusting White Balance (l 28)
≥You may not be able to achieve correct White Balance adjustment manually under weak illumination. (In this case, the [1] Indication flashes.)
≥Turning the power off will release the adjusted White Balance setting.
≥This mode cannot be set or released while recording.
≥It is not possible to use Horizontal Stripes Reduction Mode and Backlight Compensation Function when this mode is activated.
59