Formatting the Memory Card | Panasonic SV-AV30U instruction

ªPlaying back still pictures one by

one (P.Slide Show) (l 32)

≥Playback time may take longer than usual depending on the picture.

≥If the P. Slide show data is not recorded on the Memory Card, the display reverts to

the index picture screen.

≥The time for the Slide show set by SD- MovieStage Ver.2.0 is not applied to the SD Multi AV Device.

ªFormatting the Memory Card

(l 33)

≥Normally, it is not necessary to format the Memory Card.

≥If the Memory Card performance becomes unstable (recording or playback fails, etc.), try to format it.

≥If a message to prompt you to check the Memory Card comes up, it will be necessary to format it in order to use it on

the SD Multi AV Device.

≥By formatting, all data stored in the Memory Card (e.g., still pictures, MPEG4 moving pictures, voice data, music data) are erased.

≥Format the Memory Card on the SD Multi AV Device or on the SD-Jukebox Ver.3.0 (supplied). A Memory Card formatted on a machine other than the SD Multi AV Device may not be used. A Memory Card formatted on the SD Multi AV Device may not be used on other machines. Format a Memory Card on the machine on which it is used.

≥Particularly for a Memory Card containing music files, check in the Memory Card using SD-Jukebox Ver.3.0, with which the music files were recorded, then format it. (For details, read the PDF-format manual

for SD-Jukebox Ver.3.0.)

≥Do not use the personal computer (Explorer) to format it. Otherwise, it may not be recognized by the SD Multi AV Device.

≥If the write protection switch of the SD Memory Card is set to [LOCK], data

cannot be erased.

≥When the Memory Card is formatted, the files will be deleted, even if files are locked.

≥As formatting erases all the data, save the necessary data on a personal computer, etc. beforehand.

≥Format may take a little time. Wait until the Card Access Lamp goes out.

ªFitting on the AV Cradle (l 35)

≥To fit the SD Multi AV Device on the AV Cradle, turn the SD Multi AV Device [OFF].

≥When the SD Multi AV Device is connected to the AV Cradle, the SD Multi AV Device cannot record through-the-lens images.

≥When the AC adaptor is connected to this SD Multi AV Device, the SD Multi AV Device cannot be fitted on the AV Cradle.

ªPlaying Back on an external

device (l 36)

≥When connecting, turn the power [OFF]. ≥To cause the display on the screen to

disappear, set [DISPLAY] in the [DISPLAY SETUP] menu to [OFF].

≥In the connection described in this item, the speaker or the stereo earphones of

this Device cannot be used.

≥To view pictures on the LCD monitor of the SD Multi AV Device fitted on the AV Cradle, set the AV output control switch to [LCD MONITOR]. (The sound is also heard from the speaker of the SD Multi AV Device.)

≥If the SD Multi AV Device is connected to an external device, such as a TV and it outputs video and audio to the device, the sound is not heard from the speaker of this Device even with [BEEP] in the menu

set to [ON].

≥Part of the characters may be clipped on the screen, depending on the type of TV.