Panasonic SV-AV30U manual Others, After Use

Page 49

Others

Charge the built-in battery for maintaining the date information

This built-in battery is used for the memory of date and time. If [PRESS MENU TO SET CLOCK] is displayed when the power is on, the built-in battery 1 may be exhausted. Charge using the following procedure:

1 Take the battery out and plug in the AC adaptor. (l 10)

2Turn the power off and leave the SD Multi AV Device as it is for approx. 12 hours.

≥After recharging the built-in battery, adjust the date	2
and time. (l 17)

≥Even if the built-in battery is not run down, [PRESS MENU TO SET CLOCK] is displayed at the time of purchase.

After Use

1Turn off the SD Multi AV Device.

2Take out the Memory Card. (l 11)

3Detach the power supply and retract the LCD Monitor.

4Put the SD Multi AV Device into the Wearable Carry Case.

DC IN 4.8V

OFF PLAY REC

Image 49

Contents Model No. SV-AV30U End User License Agreement Contents Others Information for Your SafetyDear Customer While SV-AV30U FCC Note U.S. onlyPower supply frequency Clock settingIntroduction Optional Accessory Standard AccessoriesMenu Button Menu l Multi-function Button Controls and ComponentsOperating/Select Function SET l 14, 21, 23, 25 Release Button PUSH1 l DC Input Socket DC in 4.8V lWait until Power Lamp 1 goes off Charging the BatteryRemoving the Memory Card Inserting a Memory CardUsing the Remote Controller Earphones Using the LCD MonitorOperating the Remote Controller Files. lREC mode Set the Power/Mode Switch to Play or RECPlay mode About the Operation ModesSelect a desired mode. l Press the Menu Button Using the Menu ScreenPress the UP/DOWN side of the Multi Sub-Menu for REC Mode REC ModeDisplay setup Display Setup Display Display List of MenusSub-Menu for Play Mode Play ModeReturn Setting Date and TimeSet the Power/Mode Switch to REC. l Press for approx second Setting the Power Supply FrequencyTo Release this mode Dark patterns under fluorescent lightingLCD Brightness Brightness Adjusting Brightness and Color Level on the LCD MonitorLCD Color Level Color Press the 1 SET Button Operation during Playback Playing back Still PicturesTo Play Back All of the Still Pictures One by One While playing back, press the 1 SET ButtonTo Double the Image Size Recording Moving Pictures MPEG4Press the Recording Start/Stop Button Press 2k for approx secondªOperation during Playback Playing Back Moving Pictures MPEG4ªFor Repeat Playback ªTo Change the Display SizeSpeak into the built-in microphone 1 This SD Multi AV Device Recording Voice Voice Recording FunctionHearing the Voice Recorded Voice Playback Operation during playing Listening to Music Music PlaybackªTo Repeat Playback Set Repeat to 1MUSIC or ALLªSelecting a Playlist Adjusting the VolumeSelecting a desired Sound Quality Press s or r of the VOL ButtonBacklight Compensation Function Adjusting White BalanceTo Erase All Files Erasing the Files Recorded on a Memory CardSelect YES and press the 1 SET Button To Release the File Protection Protecting files File ProtectionTo Lock All Files Select Unlock in aboveTo Release All the Dpof Settings Writing Printing Data on a Memory Card Dpof SettingTo Check the Dpof Settings in Slide Show Creating P.Slide Show Data with SD- MovieStage Ver.2.0 Playing back still pictures one by one P.Slide ShowSelect YES and press the 1 SET Button to be formatted Formatting the Memory CardUsing the AV Cradle Fitting on the AV Cradle Playing Back on an external device Useful Connection AV Cradle always connected Sample 2 example when The SD Multi AV Device is not usedSample Details of the connectionRecording pictures supplied from an external device REC Timer About the supplied software About the supplied softwareSystem Requirements for USB Driver USB DriverSD-MovieStage Features of SD-MovieStage Ver.2.0System Requirements for SD-MovieStage Ver.2.0 DisplaySD-Jukebox Features of SD-Jukebox Ver.3.0System Requirements for SD-Jukebox Ver.3.0 SoundPage Click SD-Jukebox Ver.3.0 Installing SD-Jukebox Ver.3.02≥Connect the USB cable after the USB driver is installed Connecting with the PCStarting the Software Starting the SD-MovieStage Ver.2.0If you no longer need software Uninstall Disconnecting the USB Cable safelyDouble click the in task tray Select USB Mass Storage Device and click Stop Click OKConstructing a Folder when the Memory Card is used with a PC After Use OthersIndications Card Full Repeat Playback l 23Thoroughly with a soft dry cloth Battery Characteristics Optimal Use of the BatteryAbout the Lens About the AC AdaptorWrite-Protect Switch Power Supply l State of Power Lamp while ChargingInserting a Memory Card l Using the Remote Controller Earphones l Using the LCD Monitor lTurning the Power On/Selecting Operation Modes l Using the Menu Screen lPlaying back Still Pictures l Recording Still Pictures lRecording Moving Pictures MPEG4 l Recording Voice Voice Recording Function l Playing Back Moving Pictures MPEG4 lAdjusting White Balance l Adjusting the Volume lHearing the Voice Recorded Voice Playback l Listening to Music Music Playback lErasing the Files Recorded on a Memory Card l Writing Printing Data on a Memory Card Dpof SettingProtecting files File Protection Formatting the Memory Card Playing back still pictures one by One P.Slide Show lFitting on the AV Cradle l Playing Back on an external Device lConnecting with the PC l Using Auto Recording FunctionRecording pictures supplied from An external device l Useful Connection AV Cradle Always connected l3Insert the supplied CD-ROM into the CD-ROM drive 1Click Next5Click Next 6Click Next 7Click Finish Before Requesting Service Even if a Memory Card is formatted It cannot be used During Playback an k Indication is DisplayedSound is not heard while a still picture is played back Is connected with a TVRemoval warning appears SD Multi AV Device Panasonic SV-AV30U SpecificationsLimited Warranty Limited Warranty For U.S.A. OnlyLimited Warranty Coverage Carry-In or Mail-In ServiceLimited Warranty Limits And Exclusions Product Repairs Customer Services Directory For U.S.A. OnlyUtilización Adaptador CA Alimentación eléctricaCarga de la batería Encendido/Selección modos de funcionamiento Inserción de la Tarjeta de memoriaInformaciones sobre el modo de Funcionamiento Poner el botón de encendido/selector Modo en Play o RECPoner el botón de encendido/selector Grabación de imágenes estáticas/imágenes dinámicas/la vozModo en REC Pulsar el botón de grabación Start/StopPanasonic Canada Inc