Kit contents

Instruction Sheet

Phaser ¨ 200e

Phaser ¨ 200i

Phaser ¨ 220e

Upgrading a Phaser¨ 200e, 200i or 220e printer to a Phaser¨ 240

This kit contains the components necessary to upgrade a Phaser 200e, 200i or 220e to a Phaser 240 Color Printer. Generally, this involves replacing the printerÕs old image processor board with a new image processor board. In the case of the Phaser 200e and 200i, the printerÕs engine control board must also be replaced with a new engine control board included in this kit. In all cases, the unused or replaced components must be returned to Tektronix. This upgrade should only be installed by qualiÞed service personnel.

■Phaser 240 image processor board

■print engine controller board

■8-Mbyte RAM SIMM

■Ethernet card (Option P1)

Static electricity precautions

■Plug in the ground adapter (003-1501-00) in an AC outlet. Connect the anti-static mat (006-7056-00) to the adapterÕs groundplug.

■Put on your anti-static wrist strap and connect it to the anti-static mat.

■Leave the printer plugged into its power outlet; this preserves a ground path for static discharges.

■Touch the printer's bare metal frame often to discharge static electricity from your body.

■Handle the circuit board(s) by their edges only.

■Do not lay the board(s) on a metal surface.

■Avoid wearing nylon or polyester clothing; they generate static electricity.

063-1865-AA