Tektronix 200I, 200E instruction sheet Return the old boards to Tektronix

Upgrading a Phaser¨ 200e, 200i or 220e printer to a Phaser¨ 240

Return the old boards to Tektronix

1.Repack the old image processor and engine board (new or old) in the anti-static bags. Put the anti-static bags inside the shipping box.

2.In the U.S.A.:

a.Write the printerÕs original serial number on the shipping return label. attach the shipping label to the box, covering the original shipping label.

b.Securely tape the box closed and mail it to the pre-addresses location. Postage is prepaid.

Outside the U.S.A.:

a.AfÞx the special international shipping return label, included with this upgrade kit, to conceal the original U.S. shipping label.

b.Write the printerÕs serial number on the shipping return label.

c.Tape the box closed and ship the box to Tektronix, using you respective countryÕs shipping method.

8