Loading Media And Ribbon
Loading Media And Ribbon
Use the sample rolls of media and ribbon shipped with the printer.
CAUTION DO NOT TOUCH the printhead or the electronic components under the printhead assembly.
CAUTION Do not close the pivoting deck without label stock installed between the printhead and the platen, because debris on the platen may damage the printhead.
Loading Roll Media
Liquid Crystal Display (LCD) 
Media Cover
PAUSE |
|
Key | Media Hanger |
| |
| Media Hanger |
Pivoting | Guide |
Deck |
|
| Media Width |
| Guide |
Deck Lock | Media Damper |
Lever |
1.Slide the media hanger guide outward to the end of the media hanger, and flip it down into the horizontal position (as shown).
2.Open the pivoting deck by rotating the deck lock lever fully clockwise.
3.Slide the media width guide close to the outside end of the media damper.
14