Primera Technology DX850 quick start Loading the Label Stock

Section 2: Loading the Label Stock

1.Remove the Roll Bar and Roll Guides from the Label Dispenser. The Roll Guides and Roll Drag Arm are removable and adjustable. They are held in place magnetically. (Figure 2-1.)

Figure 2-1.

2.Remove one Roll Guide and the Roll Drag Arm from the Roll Bar.

3.Place the label stock roll on the Roll Bar with one side against the upright of the remaining roll guide. Place it on the Roll Bar with the loose end of the stock feeding off the top of the roll. (Figure 2-2.)

Figure 2-2.

Tip! For smaller diameter label roll cores you may need to reverse the Roll Guides so that the bottom of the guides are facing out to allow the uprights to be placed next to the roll.

4 DX850 Label Dispenser