Chapter 3 Configuring the management IP interface 55
Configuring the management IP address
You use the serial interface to assign the VPN Router 2750 a management IP address and subnet mask so that you can then use a Web browser for management.
To configure the management IP address using the serial interface:
1Turn on the terminal or PC.
Configure the terminal or PC as follows:
•9600 baud
•eight data bits
•one stop bit
•no parity
•no flow control
2Connect the serial cable (supplied with the VPN Router 2750) from the gateway’s serial port to a terminal or to the communications port on a PC.
3On the PC, start HyperTerminal or another terminal emulation program, and press Enter.
The Welcome window appears.
Welcome to the VPN Router
Copyright (c)
Version: |
| V06_20.004 | |
Creation | date: | Mar 7 | 2006, 13:52:02 |
Unit Serial Number: | 19677 |
| |
Please enter the administrator's user name:
4Enter the default user name and password for the administrator.
The factory default user name is admin and the default password is setup. The user name and password are case sensitive.
Please enter the administrator's user name: admin
Please enter the administrator's password: *****