Transcend Information TS-ABX31 Standard Cmos Setup, Supervisor / User Password, Save & Exit Setup

BIOS SETUP 18

•SUPERVISOR / USER PASSWORD

Change, set, or disable a password. In some BIOS versions that allow separate user and supervisor passwords, only the supervisor password permits access to Setup. The user pass- word generally allows only power-on access.

•IDE HDD AUTO DETECTION

Automatically detect and configure IDE hard disk parameters.

•SAVE & EXIT SETUP

Save settings in nonvolatile CMOS RAM and exit Setup.

•EXIT WITHOUT SAVING

Abandon all changes and exit Setup.

3.3 Standard CMOS Setup

•Date (mm:dd:yy) / Time (hh:mm:ss)

Highlight the items and use PageUp/PageDown to change the value of Date/Time.

•Primary Master / Primary Slave / Secondary Master / Secondary Slave

This mainboard can support four IDE devices. We recommend that you select type “AUTO” for all drives. The BIOS can automatically detect the specifications and optimal operating mode of almost all IDE hard drives. When you select type “AUTO” for a hard drive, the BIOS detects its specifications during POST while the system boots. If you do not want to select drive type “AUTO”, other methods of selecting the drive type are also available.