Alpha Vision Tech Installation, Unpacking the MPS48-7M, Recommended Tools and Materials

Page 14

4.0 Installation

4.1Unpacking the MPS48-7M

Remove the mounting bracket and enclosure from the shipping carton. Inspect the MPS48-7M for shipping damage.

Verify each carton contains:

MPS48-7M enclosure

Mounting bracket and hardware

3/4" 3-hole strain relief fitting

1/2" strain relief fitting

Cable ties

Quick Start Guide

4.2Enclosure Installation, Wall-mount or Wooden Pole-mount

Most codes require the base of the enclosure to be located a minimum height from the ground. Always verify height restrictions before installation.

ATTENTION:

Before installing an enclosure, the location and method of mounting must be approved by the property owner.

Recommended Tools and Materials:

Ratchet with 7/16" socket

Level

Phillips screwdriver

Two user-supplied 1/4" x 2-1/2" (7mm x 60mm) lag bolts with flat washers

Stud finder (optional)

Installation Procedure:

1.Remove the mounting hardware from the inside of the bracket and position the bracket on a wall or wooden pole capable of supporting 35 lb. (16kg). Use a backing plate if necessary.

2.Level the bracket vertically with the tab facing up.

3.Secure the bracket to the wall or pole using two user-supplied 1/4" x 2-1/2" lag bolts. The hardware must sit flush inside the bracket dimples for proper installation.

Tab

Lag Bolt

Lag Bolt

14

021-511-B4-002, Rev. B

Image 14
Contents Technical Manual PowerAlpha Technologies MPS48-7M Technical Manual Per FCC 47 CFRContents List of Figures and Tables MPS48-7M OverviewSafety Notes To avoid damage General Safety PrecautionsTo avoid injury Battery Safety Notes Chemical HazardsMechanical Safety Battery Maintenance GuidelinesElectrical Safety Recycling and Disposal InstructionsKey Features IntroductionTheory of Operation BackhaulSpecifications InputSpare Parts and Options Installation Procedure InstallationEnclosure Installation, Wall-mount or Wooden Pole-mount Unpacking the MPS48-7MPage Enclosure Installation, Steel or Concrete Pole Required Tools and MaterialsAC Input 120/240Vac Connection Procedure AC ConnectionsInstalling the Transformer AC Connection with High Voltage TransformerInstalling the Streetlight AC Power Tap Cable Network Cable Connection Procedure 3-hole Strain Relief FittingBattery Connection Procedure Network ConnectionsNormal Operation OperationStart-up Runtime hours vs Temperature Typical Recharge time vs Load Battery Backup ModeCharging Mode Connecting to the Local Craft Port TroubleshootingTroubleshooting Table Fault Corrective ActionReplacing the Power Module MaintenanceBattery Replacement Battery Management 40%USA

MPS48-7M specifications

Alpha Vision Tech's MPS48-7M is a sophisticated multi-purpose system designed to meet the demands of modern technology applications. This device stands out in the market due to its range of impressive features, advanced technologies, and essential characteristics that cater to both industrial and commercial sectors.

One of the key features of the MPS48-7M is its cutting-edge processing power. Equipped with a high-performance multi-core processor, the system ensures rapid data processing and seamless multitasking capabilities. This means users can run multiple applications effectively without any lag, which is essential for time-sensitive operations in various industries.

The MPS48-7M also boasts an extensive connectivity suite. It supports various communication protocols such as Wi-Fi, Bluetooth, and Ethernet, enabling users to connect with different devices and networks efficiently. This flexibility facilitates the system’s integration into existing infrastructures, making it an ideal choice for organizations looking to enhance their technological setups.

Display quality is another highlight of the MPS48-7M. Featuring a high-resolution screen, it offers clear, vibrant visuals that significantly improve user interaction and experience. The touchscreen interface is intuitive and responsive, allowing users to navigate with ease and efficiency.

Security is paramount in today’s digital landscape, and Alpha Vision Tech has equipped the MPS48-7M with robust security features. These include advanced encryption methods and multi-factor authentication, ensuring that sensitive data remains protected from unauthorized access. This level of security makes the MPS48-7M suitable for applications in finance, healthcare, and other sectors that require stringent data protection measures.

Moreover, the device is designed with scalability in mind. Its architecture allows for easy upgrades and expansions, which means businesses can adapt it to their evolving needs without the need for a complete system overhaul. This future-proofing aspect is vital in a rapidly changing technological environment.

Lastly, the MPS48-7M is built with durability and energy efficiency in consideration. Its compact yet robust design makes it suitable for various environments, from bustling factory floors to office spaces. The energy-efficient components also contribute to reduced operational costs, making it a responsible choice for eco-conscious organizations.

In summary, the Alpha Vision Tech MPS48-7M combines high processing power, extensive connectivity, vibrant display capabilities, robust security features, scalability, and energy efficiency. This multifaceted system is poised to meet the diverse demands of contemporary users, making it a valuable addition to any technological arsenal.