Alpha Vision Tech MPS48-7M AC Input 120/240Vac Connection Procedure, AC Connections

Page 17
3/4" Knockout
1/2" Knockout

4.0Installation, continued

4.4 AC Input (120/240Vac) Connection Procedure

Required Tools and Materials:

•Hammer with punch or screwdriver

•1" Open-end wrench

•Channellock pliers

•11/32" (9mm) torque wrench or nut driver

•#1 flathead torque screwdriver

ATTENTION:

The user or installer must provide an accessible system disconnect device located near the power supply enclosure as required by local electrical codes, and an over-current protection device with a maximum rating of 20A, or as required by local electrical codes.

1.Verify utility power is OFF. Tag and lock utility power switch.

2.Remove the 1/2" EMT knockout (7/8" dia.) and the 3/4" EMT knockout (1 1/8" dia.), located in the center bottom of the enclosure. For alternate installation, remove knockouts from the right side, left side, or back left of the enclosure as needed.

3. Install the provided 1/2" strain relief fitting, or user-supplied 1/2" Electrical Metallic Tubing (EMT), in the front 1/2" knockout. Route the line cord, or #18AWG wire for line, neutral,

and ground, between the enclosure and utility power connection. When installing the strain relief fitting, run the line cord or AC wiring through the outer nut before installing the rest of the fitting. See Fig. 4-1.

4.For 120V applications: connect the line and neutral wires to the AC input block. Torque to 4.5 in-lbs (.5 N m).

For 240V applications: connect L1 and L2 wires to the AC input block. Torque to 4.5 in-lbs (.5 N m).

5.Connect the ground wire (green) to the #10 ground stud. Torque to 36 in-lbs (4.1 N m).

6.Tighten the strain relief fitting using Channellock pliers and a 1" wrench.

7.For 120V applications, remove the protective label on the input voltage select switch, and move the switch to the 120V position. See Fig. 4-2.

Up for

120V

 

 

Outer Nut

 

 

 

 

Fig. 4-1, AC Connections

Fig. 4-2, Input Voltage Select Switch

021-511-B4-002, Rev. B

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Technical Manual PowerAlpha Technologies Per FCC 47 CFR MPS48-7M Technical ManualContents MPS48-7M Overview List of Figures and TablesSafety Notes To avoid damage General Safety PrecautionsTo avoid injury Chemical Hazards Battery Safety NotesElectrical Safety Battery Maintenance GuidelinesMechanical Safety Recycling and Disposal InstructionsIntroduction Key FeaturesBackhaul Theory of OperationInput SpecificationsSpare Parts and Options Enclosure Installation, Wall-mount or Wooden Pole-mount InstallationInstallation Procedure Unpacking the MPS48-7MPage Required Tools and Materials Enclosure Installation, Steel or Concrete PoleAC Connections AC Input 120/240Vac Connection ProcedureAC Connection with High Voltage Transformer Installing the TransformerInstalling the Streetlight AC Power Tap Cable 3-hole Strain Relief Fitting Network Cable Connection ProcedureNetwork Connections Battery Connection ProcedureNormal Operation OperationStart-up Runtime hours vs Temperature Typical Recharge time vs Load Battery Backup ModeCharging Mode Troubleshooting Table TroubleshootingConnecting to the Local Craft Port Fault Corrective ActionReplacing the Power Module MaintenanceBattery Replacement 40% Battery ManagementUSA

MPS48-7M specifications

Alpha Vision Tech's MPS48-7M is a sophisticated multi-purpose system designed to meet the demands of modern technology applications. This device stands out in the market due to its range of impressive features, advanced technologies, and essential characteristics that cater to both industrial and commercial sectors.

One of the key features of the MPS48-7M is its cutting-edge processing power. Equipped with a high-performance multi-core processor, the system ensures rapid data processing and seamless multitasking capabilities. This means users can run multiple applications effectively without any lag, which is essential for time-sensitive operations in various industries.

The MPS48-7M also boasts an extensive connectivity suite. It supports various communication protocols such as Wi-Fi, Bluetooth, and Ethernet, enabling users to connect with different devices and networks efficiently. This flexibility facilitates the system’s integration into existing infrastructures, making it an ideal choice for organizations looking to enhance their technological setups.

Display quality is another highlight of the MPS48-7M. Featuring a high-resolution screen, it offers clear, vibrant visuals that significantly improve user interaction and experience. The touchscreen interface is intuitive and responsive, allowing users to navigate with ease and efficiency.

Security is paramount in today’s digital landscape, and Alpha Vision Tech has equipped the MPS48-7M with robust security features. These include advanced encryption methods and multi-factor authentication, ensuring that sensitive data remains protected from unauthorized access. This level of security makes the MPS48-7M suitable for applications in finance, healthcare, and other sectors that require stringent data protection measures.

Moreover, the device is designed with scalability in mind. Its architecture allows for easy upgrades and expansions, which means businesses can adapt it to their evolving needs without the need for a complete system overhaul. This future-proofing aspect is vital in a rapidly changing technological environment.

Lastly, the MPS48-7M is built with durability and energy efficiency in consideration. Its compact yet robust design makes it suitable for various environments, from bustling factory floors to office spaces. The energy-efficient components also contribute to reduced operational costs, making it a responsible choice for eco-conscious organizations.

In summary, the Alpha Vision Tech MPS48-7M combines high processing power, extensive connectivity, vibrant display capabilities, robust security features, scalability, and energy efficiency. This multifaceted system is poised to meet the diverse demands of contemporary users, making it a valuable addition to any technological arsenal.
Top Page Image Contents