Alpha Vision Tech MPS48-7M technical manual Installing the Streetlight AC Power Tap Cable

Page 19

4.0Installation, continued

4.5 AC Connection with High Voltage Transformer, continued

4.5.2 Installing the Streetlight AC Power Tap Cable

1.Remove the 1/2" EMT knockout (7/8" dia.) and the 3/4" EMT knockout (1 1/8" dia.), located in the center bottom of the enclosure. For alternate installation, remove knockouts from the right side, left side or back left of the enclosure as needed.

2.Install the provided 1/2" strain relief fitting in the 1/2" knockout. Route the Streetlight AC Power Tap Cable and separate 12AWG safety ground wire between the enclosure and utility power connection. Connect the terminal end of the safety ground.

3.Remove two inches of the outer insulation from the Streetlight AC Power Tap Cable,

and strip the white and black wires 1/4". See Fig. 4-3.

3/4" Knockout 1/2" Knockout

4.Connect the black wire to the L1 terminal on the AC input block. See Fig. 4-4.

5.Connect the white wire to the L2/N terminal on the AC input block.

6.Connect a safety ground using a #10 ring lug (for #18AWG wire) to the #10 ground stud located on the back wall of the enclosure. Torque to 36 in-lbs (4.1 N m).

Do not connect AC power at this time; continue to Section 4.6.

Strip 1/4"

Strip 2"

(outer insulation)

Fig. 4-3, Streetlight AC Power Tap Cable Stripped

Fig. 4-4, Streetlight AC Power Tap Cable Installed

021-511-B4-002, Rev. B

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Technical Manual PowerAlpha Technologies Per FCC 47 CFR MPS48-7M Technical ManualContents MPS48-7M Overview List of Figures and TablesSafety Notes To avoid injury General Safety PrecautionsTo avoid damage Chemical Hazards Battery Safety NotesRecycling and Disposal Instructions Battery Maintenance GuidelinesElectrical Safety Mechanical SafetyIntroduction Key FeaturesBackhaul Theory of OperationInput SpecificationsSpare Parts and Options Unpacking the MPS48-7M InstallationEnclosure Installation, Wall-mount or Wooden Pole-mount Installation ProcedurePage Required Tools and Materials Enclosure Installation, Steel or Concrete PoleAC Connections AC Input 120/240Vac Connection ProcedureAC Connection with High Voltage Transformer Installing the TransformerInstalling the Streetlight AC Power Tap Cable 3-hole Strain Relief Fitting Network Cable Connection ProcedureNetwork Connections Battery Connection ProcedureStart-up OperationNormal Operation Charging Mode Battery Backup ModeRuntime hours vs Temperature Typical Recharge time vs Load Fault Corrective Action TroubleshootingTroubleshooting Table Connecting to the Local Craft PortBattery Replacement MaintenanceReplacing the Power Module 40% Battery ManagementUSA

MPS48-7M specifications

Alpha Vision Tech's MPS48-7M is a sophisticated multi-purpose system designed to meet the demands of modern technology applications. This device stands out in the market due to its range of impressive features, advanced technologies, and essential characteristics that cater to both industrial and commercial sectors.

One of the key features of the MPS48-7M is its cutting-edge processing power. Equipped with a high-performance multi-core processor, the system ensures rapid data processing and seamless multitasking capabilities. This means users can run multiple applications effectively without any lag, which is essential for time-sensitive operations in various industries.

The MPS48-7M also boasts an extensive connectivity suite. It supports various communication protocols such as Wi-Fi, Bluetooth, and Ethernet, enabling users to connect with different devices and networks efficiently. This flexibility facilitates the system’s integration into existing infrastructures, making it an ideal choice for organizations looking to enhance their technological setups.

Display quality is another highlight of the MPS48-7M. Featuring a high-resolution screen, it offers clear, vibrant visuals that significantly improve user interaction and experience. The touchscreen interface is intuitive and responsive, allowing users to navigate with ease and efficiency.

Security is paramount in today’s digital landscape, and Alpha Vision Tech has equipped the MPS48-7M with robust security features. These include advanced encryption methods and multi-factor authentication, ensuring that sensitive data remains protected from unauthorized access. This level of security makes the MPS48-7M suitable for applications in finance, healthcare, and other sectors that require stringent data protection measures.

Moreover, the device is designed with scalability in mind. Its architecture allows for easy upgrades and expansions, which means businesses can adapt it to their evolving needs without the need for a complete system overhaul. This future-proofing aspect is vital in a rapidly changing technological environment.

Lastly, the MPS48-7M is built with durability and energy efficiency in consideration. Its compact yet robust design makes it suitable for various environments, from bustling factory floors to office spaces. The energy-efficient components also contribute to reduced operational costs, making it a responsible choice for eco-conscious organizations.

In summary, the Alpha Vision Tech MPS48-7M combines high processing power, extensive connectivity, vibrant display capabilities, robust security features, scalability, and energy efficiency. This multifaceted system is poised to meet the diverse demands of contemporary users, making it a valuable addition to any technological arsenal.
Top Page Image Contents