Alpha Vision Tech MPS48-7M Network Cable Connection Procedure, hole Strain Relief Fitting

Page 20

4.0Installation, continued

4.6Network Cable Connection Procedure

Required Tools and Materials:

Channellock pliers

1.Remove the white seal from the 3-hole strain relief fitting, and install the base of the fitting into the 3/4" knockout. Secure the top inside nut.

2.Route the customer-supplied connection cables into the enclosure through the outer nut and base.

Network Cable

(optional)

3.Route the Ethernet cable and auxiliary wiring (if applicable) from inside the enclosure, down through the 3-hole strain relief fitting.

4.Insert the cables into the splits in the seal, leaving about 20" for routing into the enclosure. The seal is split in three places to accommodate the cabling. See Fig. 4-5.

5.Replace the seal into the base.

6.Secure the outer nut.

7.Make connections to the RADIO, POWER and RADIO, SERIAL connectors. Connect Ethernet cable to the ETHERNET BACKHAUL connector. Connect auxiliary equipment to AUX connector (if applicable). See Fig. 4-6.

8.Plug any unused ports in the seal (use a short section of wire, or other available material).

9.Proceed to battery connection procedure. Do Not connect AC power at this time.

Splits indicated

 

 

 

 

 

 

Base

 

 

 

 

 

 

 

 

 

 

 

Seal

 

 

 

 

 

by dashed lines

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Outer Nut

 

 

 

 

 

 

 

Fig. 4-5, 3-hole Strain Relief Fitting

Fig. 4-6, Network Connections

20

021-511-B4-002, Rev. B

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Technical Manual PowerAlpha Technologies MPS48-7M Technical Manual Per FCC 47 CFRContents List of Figures and Tables MPS48-7M OverviewSafety Notes To avoid damage General Safety PrecautionsTo avoid injury Battery Safety Notes Chemical HazardsBattery Maintenance Guidelines Electrical SafetyMechanical Safety Recycling and Disposal InstructionsKey Features IntroductionTheory of Operation BackhaulSpecifications InputSpare Parts and Options Installation Enclosure Installation, Wall-mount or Wooden Pole-mountInstallation Procedure Unpacking the MPS48-7MPage Enclosure Installation, Steel or Concrete Pole Required Tools and MaterialsAC Input 120/240Vac Connection Procedure AC ConnectionsInstalling the Transformer AC Connection with High Voltage TransformerInstalling the Streetlight AC Power Tap Cable Network Cable Connection Procedure 3-hole Strain Relief FittingBattery Connection Procedure Network ConnectionsNormal Operation OperationStart-up Runtime hours vs Temperature Typical Recharge time vs Load Battery Backup ModeCharging Mode Troubleshooting Troubleshooting TableConnecting to the Local Craft Port Fault Corrective ActionReplacing the Power Module MaintenanceBattery Replacement Battery Management 40%USA

MPS48-7M specifications

Alpha Vision Tech's MPS48-7M is a sophisticated multi-purpose system designed to meet the demands of modern technology applications. This device stands out in the market due to its range of impressive features, advanced technologies, and essential characteristics that cater to both industrial and commercial sectors.

One of the key features of the MPS48-7M is its cutting-edge processing power. Equipped with a high-performance multi-core processor, the system ensures rapid data processing and seamless multitasking capabilities. This means users can run multiple applications effectively without any lag, which is essential for time-sensitive operations in various industries.

The MPS48-7M also boasts an extensive connectivity suite. It supports various communication protocols such as Wi-Fi, Bluetooth, and Ethernet, enabling users to connect with different devices and networks efficiently. This flexibility facilitates the system’s integration into existing infrastructures, making it an ideal choice for organizations looking to enhance their technological setups.

Display quality is another highlight of the MPS48-7M. Featuring a high-resolution screen, it offers clear, vibrant visuals that significantly improve user interaction and experience. The touchscreen interface is intuitive and responsive, allowing users to navigate with ease and efficiency.

Security is paramount in today’s digital landscape, and Alpha Vision Tech has equipped the MPS48-7M with robust security features. These include advanced encryption methods and multi-factor authentication, ensuring that sensitive data remains protected from unauthorized access. This level of security makes the MPS48-7M suitable for applications in finance, healthcare, and other sectors that require stringent data protection measures.

Moreover, the device is designed with scalability in mind. Its architecture allows for easy upgrades and expansions, which means businesses can adapt it to their evolving needs without the need for a complete system overhaul. This future-proofing aspect is vital in a rapidly changing technological environment.

Lastly, the MPS48-7M is built with durability and energy efficiency in consideration. Its compact yet robust design makes it suitable for various environments, from bustling factory floors to office spaces. The energy-efficient components also contribute to reduced operational costs, making it a responsible choice for eco-conscious organizations.

In summary, the Alpha Vision Tech MPS48-7M combines high processing power, extensive connectivity, vibrant display capabilities, robust security features, scalability, and energy efficiency. This multifaceted system is poised to meet the diverse demands of contemporary users, making it a valuable addition to any technological arsenal.
Top Page Image Contents