Alpha Vision Tech MPS48-7M technical manual Battery Connection Procedure, Network Connections

Page 21

4.0Installation, continued

4.7Battery Connection Procedure

Required Tools and Materials:

#2 flathead screwdriver

Electrical tape

1.Loosen the retaining screw on the battery retaining bracket and move the bracket clear of the battery shelf.

2.If using the battery heater mat option, verify the input voltage printed on the battery heater mat label corresponds to the selected input voltage (default 240V). Place the battery heater mat on the shelf. Connect the 3-pin connector to the Battery Heater connection on the power module.

CAUTION!

Connecting 240Vac to a battery heater mat rated 120Vac will damage the heater mat.

3.Place two 7.2Ah batteries on the battery shelf and tape the battery temperature sensor to the side of the second battery. Place the remaining two batteries on the battery shelf.

4.Replace the battery retaining bracket and secure.

5.Connect the batteries, leaving the far left negative terminal unconnected. The positive battery connections are fitted with a safety tab to prevent misconnection.

Tape Sensor to Battery

Leave Disconnected

4.8Network Connections

Make network connections and complete any other connections on the customer and service AC side at this time. When all connections are verified proceed to Section 5.0, Operation.

021-511-B4-002, Rev. B

21

Image 21
Contents Technical Manual PowerAlpha Technologies Per FCC 47 CFR MPS48-7M Technical ManualContents MPS48-7M Overview List of Figures and TablesSafety Notes General Safety Precautions To avoid injuryTo avoid damage Chemical Hazards Battery Safety NotesElectrical Safety Battery Maintenance GuidelinesMechanical Safety Recycling and Disposal InstructionsIntroduction Key FeaturesBackhaul Theory of OperationInput SpecificationsSpare Parts and Options Enclosure Installation, Wall-mount or Wooden Pole-mount InstallationInstallation Procedure Unpacking the MPS48-7MPage Required Tools and Materials Enclosure Installation, Steel or Concrete PoleAC Connections AC Input 120/240Vac Connection ProcedureAC Connection with High Voltage Transformer Installing the TransformerInstalling the Streetlight AC Power Tap Cable 3-hole Strain Relief Fitting Network Cable Connection ProcedureNetwork Connections Battery Connection ProcedureOperation Start-upNormal Operation Battery Backup Mode Charging ModeRuntime hours vs Temperature Typical Recharge time vs Load Troubleshooting Table TroubleshootingConnecting to the Local Craft Port Fault Corrective ActionMaintenance Battery ReplacementReplacing the Power Module 40% Battery ManagementUSA

MPS48-7M specifications

Alpha Vision Tech's MPS48-7M is a sophisticated multi-purpose system designed to meet the demands of modern technology applications. This device stands out in the market due to its range of impressive features, advanced technologies, and essential characteristics that cater to both industrial and commercial sectors.

One of the key features of the MPS48-7M is its cutting-edge processing power. Equipped with a high-performance multi-core processor, the system ensures rapid data processing and seamless multitasking capabilities. This means users can run multiple applications effectively without any lag, which is essential for time-sensitive operations in various industries.

The MPS48-7M also boasts an extensive connectivity suite. It supports various communication protocols such as Wi-Fi, Bluetooth, and Ethernet, enabling users to connect with different devices and networks efficiently. This flexibility facilitates the system’s integration into existing infrastructures, making it an ideal choice for organizations looking to enhance their technological setups.

Display quality is another highlight of the MPS48-7M. Featuring a high-resolution screen, it offers clear, vibrant visuals that significantly improve user interaction and experience. The touchscreen interface is intuitive and responsive, allowing users to navigate with ease and efficiency.

Security is paramount in today’s digital landscape, and Alpha Vision Tech has equipped the MPS48-7M with robust security features. These include advanced encryption methods and multi-factor authentication, ensuring that sensitive data remains protected from unauthorized access. This level of security makes the MPS48-7M suitable for applications in finance, healthcare, and other sectors that require stringent data protection measures.

Moreover, the device is designed with scalability in mind. Its architecture allows for easy upgrades and expansions, which means businesses can adapt it to their evolving needs without the need for a complete system overhaul. This future-proofing aspect is vital in a rapidly changing technological environment.

Lastly, the MPS48-7M is built with durability and energy efficiency in consideration. Its compact yet robust design makes it suitable for various environments, from bustling factory floors to office spaces. The energy-efficient components also contribute to reduced operational costs, making it a responsible choice for eco-conscious organizations.

In summary, the Alpha Vision Tech MPS48-7M combines high processing power, extensive connectivity, vibrant display capabilities, robust security features, scalability, and energy efficiency. This multifaceted system is poised to meet the diverse demands of contemporary users, making it a valuable addition to any technological arsenal.