American Power Conversion HI600SQ specs

Thank you for purchasing APC’s Home Appliance & Lighting UPS. Please fill out the enclosed Warranty Registration Card, or register your purchase on-line at: www.apc.com/support.

Overview

APC’s Home UPS (Figure 1) is designed for years of trouble-free use. The Home UPS is a squarewave back-up power supply intended to serve house loads. It is rated for 600 VA/360W at 230 Vac, 50-Hz, and operates on a wide range of input voltages (100 - 270V). If the input voltage goes out of range (less than 100V or more than 270V), the utility is isolated and the UPS supplies power to the load from an externally connected battery (may be purchased from APC, or from the supplier of your choice). The UPS can serve inductive loads (fluorescent lamps, ceiling and table fans), resistive loads (incandescent lamps), and switched mode power supply (SMPS) loads (television).

Figure 1. APC Home UPS

Checklist:

Depending on what the customer has ordered, ensure the following items have been delivered:

•Home UPS

•Wiring Kit

Section 1. Unpacking/Inspection of Home UPS (at reseller location)

!Warning: The Home UPS weighs 7 kg. Please handle carefully.

Inspect the shipping containers for signs of obvious damage. If damage to either shipping container is extensive, notify the carrier and return the unit to the factory. If there are no apparent signs of damage, carefully open the container, and remove the packing materials (do not discard). Inspect for dents, scratches, warpage of the top cover, or other signs of damage. If unit is damaged, please notify the factory and obtain a Return Material Authorization number and return the unit as/if instructed. If there are no obvious signs of damage, repackage the unit for shipment to the customer using the materials already removed from the shipping container. Ship or otherwise deliver the unit to the customer location.

Section 2. Unpacking/Inspection of Home UPS (at customer location)

Note: The Home UPS Assembly is shipped with two (one male and one female) IEC connectors and battery assembly wiring for use in installing home wiring to/from the Home UPS.

!Warning: The Home UPS weighs 7 kg. Please handle carefully.

Remove the item from the shipping container and Inspect for: dents, scratches, warpage of the top cover, or other signs of damage. If unit is damaged, please notify the factory and obtain a Return Material Authorization number and return the unit as/if instructed.

Page 1