CTFLP Enclosure Installation
Loosen (do not remove), the four .25” (.63 cm) nuts on the bracket assembly.
Wall Mount Units: Select fasteners that will accommodate the weight of the unit including the power supply.
| Mounting Bracket is permanently |
Bottom Edge of | attached to enclosure. |
| |
Enclosure | .62” (1.6 cm) Pole Bolt |
| and Square Washer |
Wiring
1.Attach conduit to the 1/2 “ hole on the bottom of the unit and wire the input line.
Bottom View
INDEX ITEM | DESCRIPTION |
160/90 VAC Indicator Lamp
2Output Cable Adapter
3Conduit entry point
4Ground Wire Lug
5Pole Bracket
Lamp is on when normal output is present Coax adapter for power supply output Physical entry point for conduit
Provides connection of chassis to earth ground Bracket for mounting the enclosure on a pole or wall
4