American Power Conversion AP9312TH quick start manual Through a Web browser, Through Telnet

Quick Configuration, continued

Accessing the	You can access the Environmental Monitoring Unit by using a
unit	Web browser, Telnet, or SNMP.

Through a Web browser.

1.From the browser, enter the unit’s System IP address or its DNS name (if a DNS name is configured).

2.Log on to the unit. The default User Name and Password are apc (lowercase).

Through Telnet.

1.Type telnet and the System IP address of the unit.

2.Log on to the unit. The default User Name and Password are apc (lowercase).

Through SNMP. The default read-only community name is public, and the default read/write community name is private.

Verifying	To confirm the basic operation of the Environmental
configuration	Monitoring Unit:
	1.	Log on to the unit, and select Environmental
		Monitoring Status from the main menu.
	2.	Confirm the operation of the probe. With the probe
		properly connected, the unit reports accurate
		temperature and humidity. If the probe is not properly
		connected, the unit reports very low temperature and
		humidity values.
	3.	Confirm contact sensing. Activate each sensor in turn,
		according to the recommendation of the sensor
		manufacturer, and verify that it operates as expected.

14