American Power Conversion AP7922 quick start How to Install the Rack PDU

Page 9

How to Install the Rack PDU

For a recessed placement: use four flat-head screws (provided) through the last four holes of each bracket.

2.Insert caged nuts (provided with the rack) on the vertical mounting rails above a number at the start of two U-spaces in your enclosure and below a number at the lower end of those two U–spaces.

2U

3.Align the mounting holes on the brackets with the caged nuts you installed in step 2, and insert four mounting screws (provided with the rack) to secure the brackets to the enclosure.

Switched Rack PDU Installation and Quick Start

5

Image 9

Contents Switched Rack Power Distribution Unit Page Contents Specifications AP7922 Product Description and InventoryDocumentation AdditionalInventory Receiving inspectionHow to Install the Rack PDU Mounting options How to Install the Rack PDU Display interface OperationQuick Configuration TCP/IP configuration methodsOverview Bootp the default setting ConfigurationQuick Configuration Option 43 = 01 04 31 41 50 43 where Local access to Remote access toControl console Use apc for both user name and password Use Telnet to access the Rack PDU at its newly assigned IPControl console on page 11 or Remote access to the control If you are not using a Bootp or Dhcp server to configureWeb interface Telnet/SSH If you enable SSL and SSH, disable FTP. Allowing file Transfers using FTP compromises the high securityEnvironment of SSL and SSH. Administrators can disable How to Recover From a Lost Password Xmodem How to Download Firmware UpdatesElectrical SpecificationsLimited warranty Warranty and ServiceWarranty limitations Obtaining serviceGeneral policy Life-Support PolicyExamples of life-support DevicesResponsibility for correcting such interference Radio Frequency InterferenceCanada-ICES Japan-VCCIAPC Worldwide Customer Support