| How to Access a Configured Rack PDU |
FTP/SCP | You can use FTP (enabled by default) or Secure CoPy (SCP) to transfer |
| new firmware to the Rack PDU, or to access a copy of the Rack PDU’s |
| event logs. SCP provides the higher security of encrypted data |
| transmission and is automatically enabled when you enable SSH. |
| If you enable SSL and SSH, disable FTP. Allowing file |
| transfers using FTP compromises the high security |
| environment of SSL and SSH. Administrators can disable |
| Note FTP using the FTP Server option of the Network menu. |
To access the Rack PDU through FTP or SCP, the default user name and password are apc and apc for an Administrator, or device and apc for a Device Manager. In the command line, use the IP address of the unit.
See the Network Management Card Addendum to use FTP or SCP to transfer firmware files to the Network Management Card. See the User’s Guide to use FTP or SCP
See also to retrieve log files from the Network Management Card.
Switched Rack PDU Installation and Quick Start | 15 |