American Power Conversion AP7922 quick start APC Worldwide Customer Support

Page 26

APC Worldwide Customer Support

Customer support for this or any other APC product is available at no charge in any of the following ways:

Visit the APC Web site to find answers to frequently asked questions (FAQs), to access documents in the APC Knowledge Base, and to submit customer support requests.

www.apc.com (Corporate Headquarters)

Connect to localized APC Web sites for specific countries, each of which provides customer support information.

www.apc.com/support/

Global support with FAQs, knowledge base, and e-support.

Contact an APC Customer Support center by telephone or e-mail.

Regional centers:

Direct InfraStruXure Customer Support

(1)(877)537-0607 (toll free)

APC headquarters U.S., Canada

(1)(800)800-4272 (toll free)

Latin America

(1)(401)789-5735 (USA)

Europe, Middle East, Africa

(353)(91)702000 (Ireland)

Japan

(0) 35434-2021

Australia, New Zealand, South Pacífic

(61) (2) 9955 9366 (Australia)

– Local, country-specific centers: go to www.apc.com/support/contact for contact information.

Contact the APC representative or other distributor from whom you purchased your APC product for information on how to obtain local customer support.

Entire contents copyright © 2003 American Power Conversion. All rights reserved. Reproduction in whole or in part without permission is prohibited. APC, the APC logo, InfraStruXure, and NetShelter are trademarks of American Power Conversion Corporation and may be registered in some jurisdictions. All other trademarks, product names, and corporate names are the property of their respective owners and are used for informational purposes only.

990-1694-001

*990-1694-001*

11/2003

 

 

 

Image 26
Contents Switched Rack Power Distribution Unit Page Contents Specifications Product Description and Inventory AP7922Inventory AdditionalDocumentation Receiving inspectionHow to Install the Rack PDU Mounting options How to Install the Rack PDU Operation Display interfaceOverview Quick ConfigurationTCP/IP configuration methods Configuration Bootp the default settingQuick Configuration Option 43 = 01 04 31 41 50 43 where Control console Local access toRemote access to Control console on page 11 or Remote access to the control Use Telnet to access the Rack PDU at its newly assigned IPUse apc for both user name and password If you are not using a Bootp or Dhcp server to configureWeb interface Telnet/SSH Environment of SSL and SSH. Administrators can disable If you enable SSL and SSH, disable FTP. Allowing fileTransfers using FTP compromises the high security How to Recover From a Lost Password How to Download Firmware Updates XmodemSpecifications ElectricalWarranty limitations Warranty and ServiceLimited warranty Obtaining serviceExamples of life-support Life-Support PolicyGeneral policy DevicesCanada-ICES Radio Frequency InterferenceResponsibility for correcting such interference Japan-VCCIAPC Worldwide Customer Support