American Power Conversion AP7562J, AP7862J quick start manual Toolless mounting

Page 8

How to Install the Basic and Metered PDU

Toolless mounting	1.	Slide the mounting pegs into the holes located in the channel in the
		rear panel of the enclosure.
	2.	Snap the PDU into place by pushing it downward until it locks into
		position.

You can mount two PDUs on one side of the enclosure by using the toolless mounting method.

Note

4	Basic and Metered Rack Power Distribution Unit

Image 8

Contents Basic and Metered Rack Power Distribution Unit This manual is available in English on the enclosed CD Contents Warranty and Service Product Description and Inventory DescriptionMetered PDU Basic PDUAdditional DocumentationInventory Receiving inspectionHow to Install the Basic and Metered PDU Attach the cordRetention trays Mounting optionsToolless mounting Bracket-mounting Raised orientationRecessed orientation Raised orientation Operation Display interface AP7862J onlyQuick Configuration for a Metered PDU TCP/IP configuration methods APC Management Card WizardInfraStruXure Manager’s documentation for more OverviewConfiguration Quick Configuration for a Metered PDU Control console Local access toRemote access to Choose Network from the Control Console menu How to Access a Configured PDU Browser interfaceTelnet PrivateHow to Recover From a Lost Password Specifications AP7862J/AP7562JWarranty and Service Limited warrantyWarranty limitations Obtaining serviceLife-Support Policy General policyExamples of life-support DevicesPage Radio Frequency Interference APC Worldwide Customer Support