American Power Conversion AP7862J, AP7562J quick start manual Bracket-mounting, Raised orientation

	How to Install the Basic and Metered PDU
Bracket-mounting	You can order a rack-mount bracket kit from APC (AR8116BLK). The
	brackets attach to the PDU in either of two directions, shown in the
	figures in step 1. Consider the orientation of the PDU in the enclosure
	before attaching the brackets. A recessed orientation allows the PDU to
	be mounted flush with the enclosure; a raised orientation allows you to
	route cables through the channel (see the figures in step 2).
	1. Attach two brackets to the rear of the PDU, using two pan-head
	screws (provided in the bracket kit) for each bracket.
	– Recessed orientation

–Raised orientation

You can mount two PDUs on one side of the enclosure by using the raised orientation.

Note

Basic and Metered Rack Power Distribution Unit 5