American Power Conversion AP7862J How to Install the Basic and Metered PDU, Attach the cord

How to Install the Basic and Metered PDU

Attach the cord	Attach the cord retention trays to the PDU, using four flat-head screws
retention trays	(provided) per tray.

Attach cords to the tray Attach a cord to the tray by looping the cord and securing it to the tray, using a wire tie (provided).

	Each cord must be secured to the tray so that you can
	unplug it from the PDU without removing the wire tie.
	Note
Mounting options	Install the PDU in the rear of the NetShelter VX Enclosure, in the cable
	channel directly behind the rear vertical mounting rails. You can install
	the PDU in one of two ways: using toolless mounting pegs (provided) or
	the mounting brackets (sold separately).
	You can order a rack-mount bracket kit from APC
	(AR8116BLK).
	Note

Basic and Metered Rack Power Distribution Unit 3