American Power Conversion AP7610 manual Compatible APC 120V PDUs, Plug Outlets Manageable

Page 2

Product Description and Inventory

AP7610-compatible Rack The AP7610 Metered Rack PDU requires connection to an additional

PDUsRack PDU. The following APC Rack PDUs are compatible with the AP7610:

Compatible APC 120V PDUs

PDU	Plug	Outlets	Manageable

AP9563	L5-20	Ten NEMA 5-20	No

AP9551	L5-20	Fourteen NEMA 5-15	No

AP9228	L5-20	Sixteen NEMA 5-15	Yes

	Compatible APC 208 V PDUs

PDU	Plug	Outlets	Manageable

AP9558	L6-20	Twelve IEC 320-C13	No

AP9559†	IEC 320 C20	Ten IEC 320-C13;	No
		Two IEC 320-C19

AP9554†	IEC 320 C20	Fourteen IEC 320-C13	No
AP9229†	IEC 320 C20	Eight IEC 320-C13	Yes

† Using these Rack PDUs with AP7610 requires an additional power cord (AP9871).

Power cord available for The following power cord can be purchased from APC: purchase

APC SKU	Description	Cord Ends
	IEC 320 C19
AP9871	to
	NEMA L6-20

2	Rack Power Distribution Unit — AP7610

Image 2

Contents Inventory Product Description and InventoryDescription Description Part Number QuantityCompatible APC 208 V PDUs Compatible APC 120V PDUsPlug Outlets Manageable PlugSafety and Grounding How to Install the PDU OverviewHow to Install the PDU Operation Display interfaceAlarm conditions Rear of AP7610Access Level Default Default Password User Name Rack PDU ConfigurationHow to configure Through a serial portStatus Information Using the menusOption Access Number OptionSetting Description Access Device Data optionSystem Management Factory Data optionLogout option Option Description NumberHow to Download Firmware to a Rack PDU Specifications AP7610Page Radio Frequency Interference 08/2003 APC Worldwide Customer Support990-1474