American Power Conversion AP7610 manual How to Install the PDU, Overview

Page 4

How to Install the PDU

Overview

Install the AP7610 Rack PDU in the rear, top two U-spaces of a rack or

 

enclosure for overhead wiring, or in the rear, bottom two U-spaces for

 

under-floor wiring. To install the Rack PDU in a NetShelter® Standard

 

Enclosure:

 

 

1. Attach a bracket to each side of the Rack PDU, using the pan-head

 

screws.

 

 

Some enclosures may require you to recess the Rack

 

 

PDU so that the back doors of the enclosure will close

 

Note

when other devices are plugged in.

For placement flush-to-rack: use four pan-head screws (provided) for each bracket.

For a recessed placement: use two pan-head screws (provided) through the last two holes of the mounting brackets and into the first two holes on the Rack PDU.

4

Rack Power Distribution Unit — AP7610

Image 4
Contents Product Description and Inventory DescriptionInventory Description Part Number QuantityCompatible APC 120V PDUs Plug Outlets ManageableCompatible APC 208 V PDUs PlugSafety and Grounding How to Install the PDU OverviewHow to Install the PDU Operation Display interfaceAlarm conditions Rear of AP7610Rack PDU Configuration How to configureAccess Level Default Default Password User Name Through a serial portUsing the menus Option Access NumberStatus Information OptionSetting Description Access Device Data optionFactory Data option Logout optionSystem Management Option Description NumberHow to Download Firmware to a Rack PDU Specifications AP7610Page Radio Frequency Interference 990-1474 APC Worldwide Customer Support08/2003