American Power Conversion AP7610 manual How to Install the PDU

Page 5

How to Install the PDU

1.Insert caged nuts (provided with the enclosure) on the vertical mounting rails above a notched hole at the start of the top two U-spaces in your enclosure and below the notched hole at the lower end of the two U-spaces.

2.Align the mounting holes on the brackets with the caged nuts you installed in step 1, and insert four mounting screws (provided with the enclosure) to secure the brackets to the enclosure.

Rack Power Distribution Unit — AP7610

Image 5

Contents Description Product Description and InventoryInventory Description Part Number Quantity Plug Outlets Manageable Compatible APC 120V PDUs Compatible APC 208 V PDUs PlugSafety and Grounding Overview How to Install the PDUHow to Install the PDU Display interface OperationRear of AP7610 Alarm conditionsHow to configure Rack PDU ConfigurationAccess Level Default Default Password User Name Through a serial portOption Access Number Using the menusStatus Information OptionDevice Data option Setting Description AccessLogout option Factory Data optionSystem Management Option Description NumberHow to Download Firmware to a Rack PDU AP7610 SpecificationsPage Radio Frequency Interference 08/2003 APC Worldwide Customer Support990-1474