American Power Conversion SSPCBE25, SL-300TFX, SL 300TFX, SURT48XLBP, 230VAC, 1400VA XL Accessories

Page 11

connection, loosen the screw and connect the surge suppression device ground lead. Tighten the screw to secure the lead.

•100V models: In order to operate at the full VA rating of the 1400VA product, the supplied 15A plug must be replaced with a 20A plug. This change must be done by qualified service personnel. Refer to the web site, www.apc.com/support for additional information.

3.Turn on all connected equipment. To use the UPS as a master ON/OFF switch, be sure all con- nected equipment is switched ON. The equipment will not be powered until the UPS is turned on.

TURNING ON THE UPS

1.Make sure the battery is connected before turning on the UPS! Press the button on the front panel to power up the UPS. This will power up connected equipment. Make sure connected equipment is switched to the ON position.

The UPS charges its battery when it is connected to utility power. The battery charges fully during the first 24 hours of normal operation. Do not expect full battery run capa- bility during this initial charge period.

The unit performs a self-test automatically when turned on and every two weeks thereafter (by de- fault). Refer to the User Configurable Items in Chapter 4, for details on changing the default interval.

2.120V models: Check the site wiring fault LED located on the rear panel. It lights up if the UPS is plugged into an improperly wired utility power outlet. Wiring faults detected include missing ground, hot-neutral polarity reversal, and overloaded neutral circuit.

If the UPS indicates a site wiring fault, get a qualified electrician to correct the building wiring.

OPTIONAL ACCESSORIES

Add any optional accessories. See the documentation accompanying the accessory for details. See the APC web site, www.apc.com for available accessories.

ACCESSORIES

If the UPS is equipped with an accessory slot, visit the APC web site, www.apc.com, for available accessories.

If a standard accessory (such as an SNMP card) is installed on this UPS, see the Utility CD for user documentation.

For additional computer system security, install PowerChutePlus® Smart-UPS monitoring software. This provides automatic unattended shutdown capabilities on most major network operating systems.

7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents APC Smart-UPS Table of Contents Page Page Safety Information Deenergizing Safety Installation Stacking the UPS on a Battery Pack If you removed the battery before mounting the UPS Avoid using extension cords and adapter plugs Accessories Operation Online LED illuminates when the UPS is supplying utility High utility voltage 230V models 120V/100V models Voltage Sensitivity Low Battery Warning Level On Battery Operation UPS ID Upsiden User Configurable Items120V models Transporting Your SMART-UPS Storage and Maintenance Replacing the Battery Module Troubleshooting Qualified electrician to correct the building wiring Service Regulatory Agency Approvals and Radio Frequency Warnings Regulatory and Warranty InformationDeclaration of Conformity Limited Warranty
Related manuals
Manual 18 pages 58.18 Kb

1400VA XL, SURT48XLBP, SL 300TFX, 120VAC, SL-300TFX specifications

American Power Conversion (APC) has long been renowned for its commitment to providing reliable power protection solutions. One of their well-regarded offerings is the APC 750VA, 100VAC Uninterruptible Power Supply (UPS). This model is designed to safeguard sensitive electronic equipment from power disturbances while ensuring continuous operation during outages.

The APC 750VA, 100VAC UPS is built to accommodate the power requirements of small networks, home office setups, and personal use. With a 750VA power capacity, it provides essential support for a variety of devices, including computers, networking equipment, and peripherals, ensuring that they remain operational during unexpected power interruptions.

One of the standout features of this APC model is its sine wave output. Unlike traditional modified sine wave outputs, sine wave technology delivers a smoother waveform, which is less stressful on connected devices, improving their longevity and performance. The UPS also includes automatic voltage regulation (AVR) that stabilizes voltage levels by correcting minor power fluctuations without switching to battery mode, thereby extending battery life and reducing unnecessary wear.

The unit also boasts several communication options. It features USB and serial ports that allow for easy connection to management software, enabling users to monitor power usage and battery health. The built-in alarm systems similarly notify users of power disturbances or battery failure, providing critical alerts that facilitate timely interventions.

Another notable characteristic of the APC 750VA UPS is its compact form factor, making it easy to position within home or office environments without consuming much space. The design is also user-friendly, featuring a clear LED display that shows battery status, load level, and overall health status at a glance.

In terms of battery characteristics, the UPS uses sealed lead-acid batteries that are user-replaceable, simplifying maintenance and ensuring that the system continues to operate effectively over the years. The battery runtime is adjustable, allowing users to choose between higher performance for critical devices or extended backup time for non-essential devices.

Overall, the APC 750VA, 100VAC UPS is a versatile and robust power protection solution, blending innovative technology with practical design elements to meet the diverse needs of users in a variety of settings. With its reliable performance, advanced features, and user-friendly interface, it has become an essential component for ensuring continuous power availability and protecting valuable electronics.
Top Page Image Contents