American Power Conversion 120VAC, SL-300TFX, SL 300TFX, SURT48XLBP, SSPCBE25, 230VAC Installation

Page 7

2: INSTALLATION

The UPS has a “rack and stack” design that provides two mounting options. The UPS can be mounted in a 46.5 cm (19-inch) equipment rack or stacked on a battery pack(s) model SU24RMXLBP2U. Hardware is provided for either option.

UNPACKING

Inspect the UPS upon receipt. APC designed robust packaging for your product. However, accidents and damage may occur during shipment. Notify the carrier and dealer if there is damage.

The packaging is recyclable; save it for reuse or dispose of it properly.

Check the package contents. The package contains the UPS (with battery disconnected), the front bezel, and a literature kit containing one CD, one serial cable, and product documentation. The pack- age will also include a mounting kit with brackets, cleats, feet, and hardware, and a rail kit (necessary for rack mounting the UPS), containing mounting rails, installation instructions, and a hardware packet.

230V models have one power cord included with the literature kit.

The UPS is shipped with the battery and the front bezel disconnected. You will connect the battery and install the bezel during the installation procedure (described later).

POSITIONING THE UPS

Place the rack and the UPS where they will be used for either rack mounting or stacking. (Both pro- cedures are detailed on the following pages.) The UPS is heavy. Select a location sturdy enough to handle the weight.

You must install the UPS in a protected area that is free of excessive dust and has adequate airflow. Ensure the air vents on the front and rear of the UPS are not blocked.

Do not operate the UPS where the temperature and humidity are outside the specified limits. Refer to Specifications at the APC web site, www.apc.com/support.

PLACEMENT

INSTALLING THE SMART-UPS

To install the Smart-UPS, follow these basic steps. Details are provided on the following pages.

1.Stack the UPS on the battery pack or install the mounting rails in the rack (four-post rack instal- lation only). Place the UPS in the rack. Install the UPS at or near the bottom of the rack.

2.Connect the battery and attach the front bezel.

3.Connect the equipment and power to the UPS.

4.Turn on the UPS.

5.Install optional software and accessories.

3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents APC Smart-UPS Table of Contents Page Page Safety Information Deenergizing Safety Installation Stacking the UPS on a Battery Pack If you removed the battery before mounting the UPS Avoid using extension cords and adapter plugs Accessories Operation Online LED illuminates when the UPS is supplying utility High utility voltage 230V models 120V/100V models Voltage Sensitivity Low Battery Warning Level On Battery Operation UPS ID Upsiden User Configurable Items120V models Transporting Your SMART-UPS Storage and Maintenance Replacing the Battery Module Troubleshooting Qualified electrician to correct the building wiring Service Regulatory Agency Approvals and Radio Frequency Warnings Regulatory and Warranty InformationDeclaration of Conformity Limited Warranty
Related manuals
Manual 18 pages 58.18 Kb

1400VA XL, SURT48XLBP, SL 300TFX, 120VAC, SL-300TFX specifications

American Power Conversion (APC) has long been renowned for its commitment to providing reliable power protection solutions. One of their well-regarded offerings is the APC 750VA, 100VAC Uninterruptible Power Supply (UPS). This model is designed to safeguard sensitive electronic equipment from power disturbances while ensuring continuous operation during outages.

The APC 750VA, 100VAC UPS is built to accommodate the power requirements of small networks, home office setups, and personal use. With a 750VA power capacity, it provides essential support for a variety of devices, including computers, networking equipment, and peripherals, ensuring that they remain operational during unexpected power interruptions.

One of the standout features of this APC model is its sine wave output. Unlike traditional modified sine wave outputs, sine wave technology delivers a smoother waveform, which is less stressful on connected devices, improving their longevity and performance. The UPS also includes automatic voltage regulation (AVR) that stabilizes voltage levels by correcting minor power fluctuations without switching to battery mode, thereby extending battery life and reducing unnecessary wear.

The unit also boasts several communication options. It features USB and serial ports that allow for easy connection to management software, enabling users to monitor power usage and battery health. The built-in alarm systems similarly notify users of power disturbances or battery failure, providing critical alerts that facilitate timely interventions.

Another notable characteristic of the APC 750VA UPS is its compact form factor, making it easy to position within home or office environments without consuming much space. The design is also user-friendly, featuring a clear LED display that shows battery status, load level, and overall health status at a glance.

In terms of battery characteristics, the UPS uses sealed lead-acid batteries that are user-replaceable, simplifying maintenance and ensuring that the system continues to operate effectively over the years. The battery runtime is adjustable, allowing users to choose between higher performance for critical devices or extended backup time for non-essential devices.

Overall, the APC 750VA, 100VAC UPS is a versatile and robust power protection solution, blending innovative technology with practical design elements to meet the diverse needs of users in a variety of settings. With its reliable performance, advanced features, and user-friendly interface, it has become an essential component for ensuring continuous power availability and protecting valuable electronics.
Top Page Image Contents