American Power Conversion 230VAC, SL-300TFX, SL 300TFX, SURT48XLBP Transporting Your SMART-UPS

Page 20

5: TRANSPORTING YOUR SMART-UPS

Always DISCONNECT THE BATTERY before shipping in compliance with U.S. Department of Transportation (DOT) regulations.

The battery may remain in the UPS; it does not have to be removed.

DISCONNECTING THE BATTERY FOR TRANSPORT

The battery is accessible from the front of the UPS. This proce- dure requires a Phillips head screwdriver.

1.Shut down any equipment attached to the UPS.

2.Disconnect the UPS from the power supply.

3.Face the front of the UPS to remove the bezel. Use both hands and grasp the finger clips on either side of the bezel. Pull to- ward you. The bezel will unsnap.

Set the bezel aside.

4. Use a screwdriver to remove the two battery door screws and open the door.

5. To disconnect the battery, take out the white cord that is tucked into the space above the battery. This cord serves as a handle for the connector ￿. Grasp the cord and pull firmly toward you.

6. Tuck the white cord on top of the battery pack.

7. Close the battery door and replace the two screws removed in

￿

Step 4.

 

 

Leave the bezel off unless the UPS is being transported in a rack.

REMOVING THE UPS FROM THE RACK

If your UPS is mounted in a rack and you are removing it from the rack for transport:

•

•

•

Remove the four ornamental screws that secure the unit to the rack. Refer to Mounting the UPS in a Rack in Chapter 2.

Grasp the handle located on the front of the UPS and pull the unit halfway out of the rack.

Use the handles on the sides of the unit for additional support and slide the unit out of the rack.

16

Page 19 Page 21
Image 20
Page 19 Page 21
Contents APC Smart-UPS Table of Contents Page Page Safety Information Deenergizing Safety Installation Stacking the UPS on a Battery Pack If you removed the battery before mounting the UPS Avoid using extension cords and adapter plugs Accessories Operation Online LED illuminates when the UPS is supplying utility High utility voltage 230V models 120V/100V models Voltage Sensitivity Low Battery Warning Level On Battery Operation User Configurable Items UPS ID Upsiden120V models Transporting Your SMART-UPS Storage and Maintenance Replacing the Battery Module Troubleshooting Qualified electrician to correct the building wiring Service Regulatory and Warranty Information Regulatory Agency Approvals and Radio Frequency WarningsDeclaration of Conformity Limited Warranty
Related manuals
Manual 18 pages 58.18 Kb

1400VA XL, SURT48XLBP, SL 300TFX, 120VAC, SL-300TFX specifications

American Power Conversion (APC) has long been renowned for its commitment to providing reliable power protection solutions. One of their well-regarded offerings is the APC 750VA, 100VAC Uninterruptible Power Supply (UPS). This model is designed to safeguard sensitive electronic equipment from power disturbances while ensuring continuous operation during outages.

The APC 750VA, 100VAC UPS is built to accommodate the power requirements of small networks, home office setups, and personal use. With a 750VA power capacity, it provides essential support for a variety of devices, including computers, networking equipment, and peripherals, ensuring that they remain operational during unexpected power interruptions.

One of the standout features of this APC model is its sine wave output. Unlike traditional modified sine wave outputs, sine wave technology delivers a smoother waveform, which is less stressful on connected devices, improving their longevity and performance. The UPS also includes automatic voltage regulation (AVR) that stabilizes voltage levels by correcting minor power fluctuations without switching to battery mode, thereby extending battery life and reducing unnecessary wear.

The unit also boasts several communication options. It features USB and serial ports that allow for easy connection to management software, enabling users to monitor power usage and battery health. The built-in alarm systems similarly notify users of power disturbances or battery failure, providing critical alerts that facilitate timely interventions.

Another notable characteristic of the APC 750VA UPS is its compact form factor, making it easy to position within home or office environments without consuming much space. The design is also user-friendly, featuring a clear LED display that shows battery status, load level, and overall health status at a glance.

In terms of battery characteristics, the UPS uses sealed lead-acid batteries that are user-replaceable, simplifying maintenance and ensuring that the system continues to operate effectively over the years. The battery runtime is adjustable, allowing users to choose between higher performance for critical devices or extended backup time for non-essential devices.

Overall, the APC 750VA, 100VAC UPS is a versatile and robust power protection solution, blending innovative technology with practical design elements to meet the diverse needs of users in a variety of settings. With its reliable performance, advanced features, and user-friendly interface, it has become an essential component for ensuring continuous power availability and protecting valuable electronics.
Top Page Image Contents