American Power Conversion SURT48XLBP, SL-300TFX, SL 300TFX User Configurable Items, UPS ID Upsiden

4:USER CONFIGURABLE ITEMS

NOTE: SETTING THESE ITEMS REQUIRES SOFTWARE OR OPTIONAL HARDWARE.

FUNCTION	FACTORY	USER SELECTABLE	DESCRIPTION
	DEFAULT	CHOICES
Automatic Self-	Every 14 days	Every 7 days	This function sets the interval at which
Test	(336 hours)	(168 hours),	the UPS will execute a self-test. Refer to
		On Startup Only,	your software manual for details.
		No Self-Test
UPS ID	UPS_IDEN	Up to eight char-	Use this field to uniquely identify the
		acters to define	UPS for network management purposes.
		the UPS
Date of Last	Manufacture	Date of Battery	Reset this date when you replace the
Battery Re-	Date	Replacement	battery module.
placement
Minimum Ca-	0 percent	15, 50, 90 percent	The UPS will charge its batteries to the
pacity Before			specified percentage before return from
Return from			a shutdown.
Shutdown
Sensitivity	High	Medium, Low	Set lower than high sensitivity to avoid
			lowered battery capacity and service life
			in situations where the connected equip-
			ment can tolerate minor power distur-
			bances.
Duration of Low	2 minutes	5, 7, 10 minutes	This function sets the time before shut-
Battery Warning			down. The UPS issues a low battery
			warning. Set it higher than the default if
			the operating system needs more time
			for shutdown.
Alarm Delay	5 second delay	30 second delay at	To avoid alarms for minor power
After Line Fail		low battery condi-	glitches, set the alarm delay.
		tion only. No
		alarm for line fail.
Shutdown Delay	20 seconds	180, 300, 600	This function sets the interval between
		seconds	the time when the UPS receives a shut-
			down command and actual shutdown.
Synchronized	0 seconds	60, 180, 300	The UPS will wait the specified time
Turn-on Delay		seconds	after the return of utility power before
			turn-on (to avoid branch circuit over-
			load).
		14