American Power Conversion SL 300TFX, SL-300TFX If you removed the battery before mounting the UPS

Page 9

3.Attach the mounting brackets to the UPS before mounting the UPS in your rack, (below). Each mounting bracket attaches to the UPS with four screws (included). Two sets of bracket holes are located on the sides of the UPS.

If you are using a four-post rack, attach the mounting brackets in the forward position. For two post rack mounting attach the brackets at the mid-point position.

Four-Post Rack Bracket Position

￿ ￿

Two-Post Rack

Bracket Position

4.Use the handles ￿ on the side of the UPS to sup- port the unit.

Due to the weight of the UPS, two people are re- quired to install it in the rack.

5.Each side of the UPS has a cleat ￿ that must slide into the groove on the rails in four-post rack mounting. Slide the UPS into position.

6.Use the four ornamental screws supplied with the UPS to attach the mounting brackets to the rack post in both two and four post mounting.

Check the rack to make sure it will not tip after loading the UPS into the rack.

Reinstalling the Battery

If you removed the battery before mounting the UPS in the

 

rack, follow this step to reinstall it.

 

Supporting the battery on the bottom, align it with the bat-

 

tery door opening and slide it into the compartment.

CONNECTING THE BATTERY AND ATTACHING THE FRONT BEZEL

The battery is accessible from the front of the UPS. This pro- cedure requires a Phillips head screwdriver.

1.Use a screwdriver to remove the two battery door screws and open the door.

Set the screws aside. You will replace them later.

5

Image 9
Contents APC Smart-UPS Table of Contents Page Page Safety Information Deenergizing Safety Installation Stacking the UPS on a Battery Pack If you removed the battery before mounting the UPS Avoid using extension cords and adapter plugs Accessories Operation Online LED illuminates when the UPS is supplying utility High utility voltage 230V models 120V/100V models Voltage Sensitivity Low Battery Warning Level On Battery Operation UPS ID Upsiden User Configurable Items120V models Transporting Your SMART-UPS Storage and Maintenance Replacing the Battery Module Troubleshooting Qualified electrician to correct the building wiring Service Regulatory Agency Approvals and Radio Frequency Warnings Regulatory and Warranty InformationDeclaration of Conformity Limited Warranty
Related manuals
Manual 18 pages 58.18 Kb

1400VA XL, SURT48XLBP, SL 300TFX, 120VAC, SL-300TFX specifications

American Power Conversion (APC) has long been renowned for its commitment to providing reliable power protection solutions. One of their well-regarded offerings is the APC 750VA, 100VAC Uninterruptible Power Supply (UPS). This model is designed to safeguard sensitive electronic equipment from power disturbances while ensuring continuous operation during outages.

The APC 750VA, 100VAC UPS is built to accommodate the power requirements of small networks, home office setups, and personal use. With a 750VA power capacity, it provides essential support for a variety of devices, including computers, networking equipment, and peripherals, ensuring that they remain operational during unexpected power interruptions.

One of the standout features of this APC model is its sine wave output. Unlike traditional modified sine wave outputs, sine wave technology delivers a smoother waveform, which is less stressful on connected devices, improving their longevity and performance. The UPS also includes automatic voltage regulation (AVR) that stabilizes voltage levels by correcting minor power fluctuations without switching to battery mode, thereby extending battery life and reducing unnecessary wear.

The unit also boasts several communication options. It features USB and serial ports that allow for easy connection to management software, enabling users to monitor power usage and battery health. The built-in alarm systems similarly notify users of power disturbances or battery failure, providing critical alerts that facilitate timely interventions.

Another notable characteristic of the APC 750VA UPS is its compact form factor, making it easy to position within home or office environments without consuming much space. The design is also user-friendly, featuring a clear LED display that shows battery status, load level, and overall health status at a glance.

In terms of battery characteristics, the UPS uses sealed lead-acid batteries that are user-replaceable, simplifying maintenance and ensuring that the system continues to operate effectively over the years. The battery runtime is adjustable, allowing users to choose between higher performance for critical devices or extended backup time for non-essential devices.

Overall, the APC 750VA, 100VAC UPS is a versatile and robust power protection solution, blending innovative technology with practical design elements to meet the diverse needs of users in a variety of settings. With its reliable performance, advanced features, and user-friendly interface, it has become an essential component for ensuring continuous power availability and protecting valuable electronics.