Indicator | Indicator Title |
| Description |
| |
LED |
|
| |||
|
|
|
| ||
120 V | 208 V | Diagnostic | The UPS has a diagnostic feature that indicates the utility voltage. | ||
|
| Utility Voltage | The UPS starts a | ||
|
|
| the voltage display. |
|
|
|
|
| Press and hold the | button to view the utility voltage bar graph indicator. | |
Battery | Battery |
| After a few seconds, this | indicator on the right of | |
Charge | Charge |
| |||
| the display panel will show the utility input voltage. |
| |||
230 V |
|
| |||
| Refer to the figure on the left for the voltage reading. |
| |||
|
|
|
| ||
|
|
| Values are not listed on the UPS. |
| |
|
|
| The indicator on the UPS shows the voltage is between the displayed value on | ||
|
|
| the list and the next higher value, (see Troubleshooting). |
|
Feature | Feature Title |
| Function |
Button |
| ||
|
|
| |
| Power On | Press this button to turn on the UPS. Continue reading for additional | |
|
| capabilities. |
|
| Automatic: The UPS performs a | ||
|
| every two weeks thereafter (by default). During the | |
|
| briefly operates the connected equipment on battery. | |
|
| Manual: Press and hold the | button for a few seconds to initiate the |
|
|
| |
| Cold Start | When there is no utility power and the UPS is off, the cold start feature will | |
|
| switch the UPS and connected equipment onto battery power, | |
|
| (see Troubleshooting). |
|
| Power Off | Press this button to turn off the UPS. |
10 |