American Power Conversion SUA3000XL NETPKG, 230 Vac Communication Ports, Emergency Power Off

Page 8

Communication Ports

SERIAL PORT USB PORT Use only the supplied cable to connect to the serial port. A standard

serial interface cable is incompatible with the UPS. Serial and USB ports cannot be used simultaneously.

Emergency Power Off

The emergency power off (EPO) feature is user configurable. EPO provides immediate de-energizing of connected equipment from a remote location, without switching to battery operation.

1.Use the EPO connector supplied with the UPS.

2.Use a normally-open contact to connect the +24 terminal to the IN terminal. External voltage is not required.

3.Wire the four-pin connector to the EPO system.

EPO PORT

(located on rear panel)

EPO

Connector

The EPO interface is a Safety Extra Low Voltage (SELV) circuit. Connect it only to other SELV circuits. The EPO interface monitors circuits that have no determined voltage potential. Such closure circuits may be provided by a switch or relay properly isolated from the utility. To avoid damage to the UPS, do not connect the EPO interface to any circuit other than a closure type circuit.

Use one of the following cable types to connect the UPS to the EPO switch.

•CL2: Class 2 cable for general use.

•CL2P: Plenum cable for use in ducts, plenums, and other spaces used for environmental air.

•CL2R: Riser cable for use in a vertical run in a floor-to-floor shaft.

•CLEX: Limited use cable for use in dwellings and for use in raceways.

•For installation in Canada: Use only CSA certified, type ELC, (extra-low voltage control cable).

•For installation in other countries: Use standard low-voltage cable in accordance with national and local regulations.

8

Smart-UPS 2200/3000 VA XL 120/208/230 VAC Tower/Rack-Mount 5U User Manual

Page 7 Page 9
Image 8
Page 7 Page 9
Contents APC Smart-UPS→XL Page Specifications Read the Safety Guide before installing the UPSIntroduction About this UPSInstallation Tower ConfigurationRack-Mount Configuration Tower to rack-mount conversion procedureAccessories Install unit in rackConnect Equipment and Power to the UPS Start-UpRear Panels Start the UPSEmergency Power Off Communication PortsDisplay Panel Indicators and Function Buttons Operation120/208 230Feature Feature Title Function Button Configuration UPS settingsBrightly Troubleshooting Problem and/or Possible Cause SolutionAVR Boost or AVR Trim LEDs are illuminated Replace Battery/Battery Disconnected LED is illuminatedInput circuit breaker trips There is no utility power UPS operates on battery although line voltage existsBattery Charge and Load LEDs flash simultaneously Diagnostic utility voltageService Maintenance, Transport, and ServiceReplacing the Battery Module Two-Year Warranty Terms of warrantyRegulatory Information Regulatory Agency Approvals and Radio Frequency WarningsFCC Compliance Notice 120/208 V models ModelsDate of product declaration
Related manuals
Manual 17 pages 20.71 Kb

2200 VA XL, 3000 VA XL, 208 VAC, 230 Vac, SUA3000XL specifications

American Power Conversion (APC), a division of Schneider Electric, is a leading provider of power protection and management solutions, particularly in the fields of uninterruptible power supplies (UPS), power distribution, and cooling solutions. One notable product within their extensive range is the APC 230 VAC, 750,100, which showcases advanced technologies designed to ensure reliable power delivery.

The APC 230 VAC, 750,100 is a high-performance UPS that offers a robust solution for businesses looking to maintain operational continuity during power disruptions. With a rated output voltage of 230 VAC, this UPS is adept at providing reliable power for various applications, including server rooms, telecommunications, and critical infrastructure.

One of the standout features of the APC 230 VAC, 750,100 is its capacity of 750 VA (volt-amperes), which translates to 600 watts of output power. This capacity ensures that the UPS can support essential equipment even during outages, safeguarding against data loss, equipment damage, and downtime. The design of the unit focuses on maximizing efficiency, ensuring lower energy costs and reduced heat emissions, which is crucial for maintaining optimal operating conditions in IT environments.

The UPS is equipped with advanced battery management technology, which enhances battery life and performance. The system features smart charging capabilities that help prolong battery lifespan by preventing overcharging and optimizing discharge cycles. Additionally, the unit incorporates a user-friendly interface with LCD displays, providing real-time status updates on power conditions, battery health, and load levels.

Another characteristic that sets the APC 230 VAC, 750,100 apart is its compact and ergonomic design, which makes installation straightforward in various environments. With multiple outlets, it allows for the simultaneous connection of multiple devices, ensuring comprehensive protection for critical loads.

Moreover, APC integrates intelligent monitoring software with the UPS, which enables remote management and monitoring. This feature is particularly beneficial for IT administrators, allowing them to track the performance of the UPS and respond swiftly to any issues.

In summary, the APC 230 VAC, 750,100 is an exemplary power protection solution that combines efficient operation, advanced technologies, and user-friendly features. Whether for small businesses or large organizations, this UPS is designed to meet the demands of modern technology, ensuring that power interruptions do not disrupt essential operations. Its innovative design and robust capabilities make it a reliable choice for maintaining the integrity of critical systems.
Top Page Image Contents