American Power Conversion SUA3000XL NETPKG Start-Up, Connect Equipment and Power to the UPS

Page 7

Start-Up

Connect Equipment and Power to the UPS

1.The UPS features a transient voltage surge-suppression (TVSS) screw located on the rear panel, for connecting the ground lead on surge suppression devices such as telephone and network line protectors.

Prior to connecting the grounding cable, ensure that the UPS is NOT connected to utility or battery power.

2. Connect equipment to the UPS. NOTE: This UPS is equipped with an external battery connector on the rear panel of the unit.

Where appropriate use an APC extension battery cable. For ordering details contact your dealer or APC through the Web site www.apc.com.

3.Add optional accessories to the SmartSlot located on the rear panel.

4.Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension cords.

230 V models: The utility power cord is supplied in the UPS literature kit. Prior to connecting the utility power, connect the ground lead (optional) to the TVSS screw.

5.120 V models: Check the SITE WIRING FAULT LED located on the rear panel. The LED will be illuminated if the UPS is plugged into an improperly wired utility power outlet, (see Troubleshooting).

6.To use the UPS as a master on/off switch be sure all connected equipment is switched on.

Rear Panels

3000 VA

120 VAC

2200 VA

120 VAC

3000 VA

208 VAC

2200 VA

3000 VA

230 VAC

Start the UPS

1.Press the button on the front panel to start the UPS.

The battery charges to 90% capacity during the first four hours of normal operation. Do not expect full battery run capability during this initial charge period.

Refer to the APC Web site, www.apc.com for battery runtimes.

2.For optimal computer system security, install PowerChute Smart-UPS monitoring software.

Smart-UPS 2200/3000 VA XL 120/208/230 VAC Tower/Rack-Mount 5U User Manual

7

Image 7
Contents APC Smart-UPS→XL Page About this UPS SpecificationsRead the Safety Guide before installing the UPS IntroductionTower Configuration InstallationTower to rack-mount conversion procedure Rack-Mount ConfigurationInstall unit in rack AccessoriesStart the UPS Connect Equipment and Power to the UPSStart-Up Rear PanelsCommunication Ports Emergency Power Off230 Display Panel Indicators and Function ButtonsOperation 120/208Feature Feature Title Function Button UPS settings ConfigurationBrightly Problem and/or Possible Cause Solution TroubleshootingInput circuit breaker trips Replace Battery/Battery Disconnected LED is illuminatedAVR Boost or AVR Trim LEDs are illuminated Diagnostic utility voltage There is no utility powerUPS operates on battery although line voltage exists Battery Charge and Load LEDs flash simultaneouslyReplacing the Battery Module Maintenance, Transport, and ServiceService Terms of warranty Two-Year WarrantyModels Regulatory InformationRegulatory Agency Approvals and Radio Frequency Warnings FCC Compliance Notice 120/208 V modelsDate of product declaration
Related manuals
Manual 17 pages 20.71 Kb

2200 VA XL, 3000 VA XL, 208 VAC, 230 Vac, SUA3000XL specifications

American Power Conversion (APC), a division of Schneider Electric, is a leading provider of power protection and management solutions, particularly in the fields of uninterruptible power supplies (UPS), power distribution, and cooling solutions. One notable product within their extensive range is the APC 230 VAC, 750,100, which showcases advanced technologies designed to ensure reliable power delivery.

The APC 230 VAC, 750,100 is a high-performance UPS that offers a robust solution for businesses looking to maintain operational continuity during power disruptions. With a rated output voltage of 230 VAC, this UPS is adept at providing reliable power for various applications, including server rooms, telecommunications, and critical infrastructure.

One of the standout features of the APC 230 VAC, 750,100 is its capacity of 750 VA (volt-amperes), which translates to 600 watts of output power. This capacity ensures that the UPS can support essential equipment even during outages, safeguarding against data loss, equipment damage, and downtime. The design of the unit focuses on maximizing efficiency, ensuring lower energy costs and reduced heat emissions, which is crucial for maintaining optimal operating conditions in IT environments.

The UPS is equipped with advanced battery management technology, which enhances battery life and performance. The system features smart charging capabilities that help prolong battery lifespan by preventing overcharging and optimizing discharge cycles. Additionally, the unit incorporates a user-friendly interface with LCD displays, providing real-time status updates on power conditions, battery health, and load levels.

Another characteristic that sets the APC 230 VAC, 750,100 apart is its compact and ergonomic design, which makes installation straightforward in various environments. With multiple outlets, it allows for the simultaneous connection of multiple devices, ensuring comprehensive protection for critical loads.

Moreover, APC integrates intelligent monitoring software with the UPS, which enables remote management and monitoring. This feature is particularly beneficial for IT administrators, allowing them to track the performance of the UPS and respond swiftly to any issues.

In summary, the APC 230 VAC, 750,100 is an exemplary power protection solution that combines efficient operation, advanced technologies, and user-friendly features. Whether for small businesses or large organizations, this UPS is designed to meet the demands of modern technology, ensuring that power interruptions do not disrupt essential operations. Its innovative design and robust capabilities make it a reliable choice for maintaining the integrity of critical systems.