American Power Conversion 208 VAC, SUA3000XL Introduction, Specifications, About this UPS, Unpack

Page 3

Introduction

About this UPS

The American Power Conversion (APC®) Uninterruptible Power Supply (UPS) provides protection for electronic equipment from utility power blackouts, brownouts, sags and surges. The UPS filters small utility line fluctuations and isolates electronic equipment from large disturbances by internally disconnecting from utility line power. The UPS provides continuous power from the internal battery until utility power returns to safe levels or the battery is fully discharged.

Unpack

Read the Safety Guide before installing the UPS.

Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.

The packaging is recyclable; save it for reuse or dispose of it properly.

Check the package contents:

•UPS •Front bezel

•Literature kit containing:

–EPO connector

–Serial cable

–USB cable

–Eight ornamental screws for securing the unit in the rack

–Eight 5/16 in (.8 cm) pan-head screws for attaching cleats to the chassis rails

(required for four post rack only)

–Eight 5/8 in (1.6 cm) pan-head screws for attaching rack-mount brackets to the unit

–Eight snap-on speed nuts

–Two rail cleats (required for four post rack only)

–Two rack-mount brackets

–Product documentation

–Smart-UPS® User Manuals CD

–PowerChute® Business Edition CD

–Safety information

–Warranty information

Additional contents for

230 V models:

–APC power cable

–Alternate input power cord (UK customers)

–IEC Power cord

–IEC jumper cables

Specifications

Temperature

32° to 104° F (0° to 40° C)

This unit is intended for indoor use

Operating

only. Select a location sturdy enough

Storage

5° to 86° F (-15°to 30° C) charge the UPS battery every six months

to handle the weight.

 

86° to 113° F (30° to 45° C) charge the UPS battery every three months

Do not operate the UPS where there

 

is excessive dust or the temperature

Maximum

 

or humidity are outside the specified

 

limits.

Elevation

 

 

Environmental factors impact battery

Operating

10,000 ft (3,000 m)

life. High temperatures, poor utility

Storage

50,000 ft (15,240 m)

power, and frequent, short duration

 

 

discharges will shorten battery life.

 

 

 

Humidity

0 to 95% relative humidity, non-condensing

 

 

 

 

Weight

142 lbs (64 kg) with battery module

142 lbs (64 kg)

 

89 lbs (40 kg) without battery module

 

 

27 lbs (12 kg) each battery module

 

 

 

 

Maximum Number of External Battery Packs Supported by the

10

Smart-UPS XL

 

 

 

 

 

NOTE: The model and serial numbers are located on a small, rear panel label. For some models, an additional label is located on the chassis under the front bezel.

Smart-UPS 2200/3000 VA XL 120/208/230 VAC Tower/Rack-Mount 5U User Manual

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents APC Smart-UPS→XL Page About this UPS SpecificationsRead the Safety Guide before installing the UPS IntroductionTower Configuration InstallationTower to rack-mount conversion procedure Rack-Mount ConfigurationInstall unit in rack AccessoriesStart the UPS Connect Equipment and Power to the UPSStart-Up Rear PanelsCommunication Ports Emergency Power Off230 Display Panel Indicators and Function ButtonsOperation 120/208Feature Feature Title Function Button UPS settings ConfigurationBrightly Problem and/or Possible Cause Solution TroubleshootingReplace Battery/Battery Disconnected LED is illuminated Input circuit breaker tripsAVR Boost or AVR Trim LEDs are illuminated Diagnostic utility voltage There is no utility powerUPS operates on battery although line voltage exists Battery Charge and Load LEDs flash simultaneouslyMaintenance, Transport, and Service Replacing the Battery ModuleService Terms of warranty Two-Year WarrantyModels Regulatory InformationRegulatory Agency Approvals and Radio Frequency Warnings FCC Compliance Notice 120/208 V modelsDate of product declaration
Related manuals
Manual 17 pages 20.71 Kb

2200 VA XL, 3000 VA XL, 208 VAC, 230 Vac, SUA3000XL specifications

American Power Conversion (APC), a division of Schneider Electric, is a leading provider of power protection and management solutions, particularly in the fields of uninterruptible power supplies (UPS), power distribution, and cooling solutions. One notable product within their extensive range is the APC 230 VAC, 750,100, which showcases advanced technologies designed to ensure reliable power delivery.

The APC 230 VAC, 750,100 is a high-performance UPS that offers a robust solution for businesses looking to maintain operational continuity during power disruptions. With a rated output voltage of 230 VAC, this UPS is adept at providing reliable power for various applications, including server rooms, telecommunications, and critical infrastructure.

One of the standout features of the APC 230 VAC, 750,100 is its capacity of 750 VA (volt-amperes), which translates to 600 watts of output power. This capacity ensures that the UPS can support essential equipment even during outages, safeguarding against data loss, equipment damage, and downtime. The design of the unit focuses on maximizing efficiency, ensuring lower energy costs and reduced heat emissions, which is crucial for maintaining optimal operating conditions in IT environments.

The UPS is equipped with advanced battery management technology, which enhances battery life and performance. The system features smart charging capabilities that help prolong battery lifespan by preventing overcharging and optimizing discharge cycles. Additionally, the unit incorporates a user-friendly interface with LCD displays, providing real-time status updates on power conditions, battery health, and load levels.

Another characteristic that sets the APC 230 VAC, 750,100 apart is its compact and ergonomic design, which makes installation straightforward in various environments. With multiple outlets, it allows for the simultaneous connection of multiple devices, ensuring comprehensive protection for critical loads.

Moreover, APC integrates intelligent monitoring software with the UPS, which enables remote management and monitoring. This feature is particularly beneficial for IT administrators, allowing them to track the performance of the UPS and respond swiftly to any issues.

In summary, the APC 230 VAC, 750,100 is an exemplary power protection solution that combines efficient operation, advanced technologies, and user-friendly features. Whether for small businesses or large organizations, this UPS is designed to meet the demands of modern technology, ensuring that power interruptions do not disrupt essential operations. Its innovative design and robust capabilities make it a reliable choice for maintaining the integrity of critical systems.
Top Page Image Contents